【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Wire-Saving Systems > S-LINK V gateway controller for open network > Specifications
Discontinuation plan
|
|
Designation | S-LINK V gateway controller for EtherCAT | |
---|---|---|
Model No. | SL-VGU1-EC | |
Supply voltage | 24 V DC+10–5% | |
Current consumption | 300 mA or less (excluding error output load and power supply for driving I/O units) (Note 1) |
|
Allowable through current | 7A (Note 2) | |
S-LINK V side |
Transmission speed | A mode: 110 kbps, B mode: 27.5 kbps, C mode: 6.9 kbps |
Refresh time | A mode: 0.29 to 10.32 ms, B mode: 1.18 to 41.29 ms, C mode: 4.70 to 165.15 ms |
|
I/O points | Max. 512 points | |
Connected node No. | Max. 256 nodes | |
Transmission distance | A mode: 50 m 164 ft max., B mode: 200 m 656 ft max., C mode: 800 m 2,625 ft max. | |
Total wiring length | A mode: 100 m 328 ft or less, B mode: 400 m 1,312 ft or less, C mode: 1,600 m 5,249 ft or less | |
Transmission cable | Exclusive 4-core flat cable (0.5 mm2) or conductor cross-section area 0.3 to 2.0 mm2 4-core VCTF cable (without shield) (Note 3) |
|
I/O combination | I/O settable in increments of 32 points | |
Error output | NPN open-collector transistor | |
EtherCAT communication side |
Protocol | CoE PDO communication, SDO communication |
Compliance | IEEE802.3u (100BASE-TX) | |
Transmission speed | 100 Mbps (100BASE-TX) | |
Transmission connector | RJ-45 × 2 | |
Distance between nodes | 100 m 328 ft or less | |
Max. number of station connections |
4,095 stations (65,535 stations when set from master side) | |
Transmission cable | Category 5e or more | |
Ambient temperature | 0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉ |
|
Ambient humidity | 10 to 90 % RH, Storage: 10 to 90 % RH | |
Material | Enclosure: ABS | |
Weight | 140 g approx. |
Notes:
1) | The current consumption value shown here is the total of the maximum current (D-G line only) supplied to the S-LINK V I/O units and the current consumption of the S-LINK V gateway controller. |
---|---|
2) | This product is not equipped with any short-circuit protective function. For this reason, select a power supply unit having short-circuit protective function (fuse, etc.). |
3) | The VCTF cable is the vinyl cabtyre cable that conforms to the requirements of JIS C 3306 "Polyvinyl chloride insulated flexible cords." |
4) | In case connecting to commercially offered product, be sure to check with this product. Station No., transmission distance, transmission speed depend on the connected product. |
Designation | S-LINK V gateway controller for CC-Link | |||||
---|---|---|---|---|---|---|
Model No. | SL-VGU1-C | |||||
Supply voltage | 24V DC +10-5 % | |||||
Current consumption | 300mA or less (excluding error output load and power supply for driving I/O units) (Note 2) | |||||
Allowable through current | 7A (Note 3) | |||||
S-LINK V system side |
Transmission speed | A mode: 110kbps, B mode: 27.5kbps, C mode: 6.9kbps | ||||
Refresh time | A mode: 0.29 to 10.32ms, B mode: 1.18 to 41.29ms, C mode: 4.70 to 165.15ms | |||||
I/O points | Buffer memory assignment pattern 1: 128 inputs max., 128 outputs max. (Note 4) Buffer memory assignment pattern 2: 256 inputs max., 256 outputs max. (Note 5) |
|||||
Connected node No. | 256 nodes max. | |||||
Transmission distance | A mode: 50m max., B mode: 200m max., C mode: 800m max. | |||||
Total wiring length | A mode: 100m or less, B mode: 400m or less, C mode: 1,600m or less | |||||
Transmission cable |
Exclusive 4-core flat cable (0.5mm2) or Conductor cross-section area 0.3 to 2.0mm2 4-core VCTF cable (without shield) (Note 6) | |||||
I/O combination | I/O settable in units of 32 Nos. | |||||
Error output | NPN open-collector transistor | |||||
CC-Link side |
Compatible network | CC-Link Ver.1.10 | ||||
Occupied station No. | 1 to 4 stations (varies with S-LINK V I/O control points.) | |||||
Transmission speed | 10Mbps | 5Mbps | 2.5Mbps | 625kbps | 156kbps | |
Total extension | 100m | 160m | 400m | 900m | 1,200m | |
Transmission cable | Specified cable (shielded twisted pair cable) | |||||
Remote unit claccification |
Remote device unit | |||||
Ambient temperature | 0 to +55℃ (No dew condensation), Storage: -20 to +70℃ | |||||
Ambient humidity | 10 to 90% RH, Storage: 10 to 90% RH | |||||
Material | Enclosure: ABS | |||||
Weight | Approx. 200g |
Notes:
1) | Mainly the S-LINK Vsystem side specifications are given above. The CC-Link side conforms to CC-Link specifications. Please confirm the details from CC-Link Partner Association. |
---|---|
2) | The current consumption value shown here is the total of the maximum current (D-G line only) supplied to the S-LINK V I/O units and the current consumption of the S-LINK V gateway controller. |
3) | This product is not equipped with any short-circuit protective function. For this reason, select a power supply unit having short-circuit protective function (fuse, etc.). |
4) | In case of buffer memory assignment pattern 1, 112 channels are assigned to remote I/O (RX / RY) and the balance 16 channels are assigned to remote register (RWrm / RWwm). |
5) | If buffer memory assignment pattern 2 is used, all the points will be assigned to the remote registers (RWrm / RWwm). |
6) | The VCTF cable is the vinyl cabtyre cable that conforms to the requirements of JIS C 3306 "Polyvinyl chloride insulated flexible cords." |
Designation | S-LINK V gateway controller for DeviceNet | |||
---|---|---|---|---|
Model No. | SL-VGU1-D | |||
Supply voltage | 24V DC +10-5 % | |||
Current consumption | 300mA or less (excluding error output load and power supply for driving I/O units) (Note 2) |
|||
Allowable through current | 7A (Note 3) | |||
S-LINK V system side |
Transmission speed | A mode: 110kbps, B mode: 27.5kbps, C mode: 6.9kbps | ||
Refresh time | A mode: 0.29 to 10.32ms, B mode: 1.18 to 41.29ms C mode: 4.70 to 165.15ms |
|||
I/O points | 512 points max. | |||
Connected node No. | 256 nodes max. | |||
Transmission distance | A mode: 50m max., B mode: 200m max., C mode: 800m max. | |||
Total wiring length | A mode: 100m or less, B mode: 400m or less, C mode: 1,600m or less | |||
Transmission cable |
Exclusive 4-core flat cable(0.5mm2) or Conductor cross-section area 0.3 to 2.0mm2 4-core VCTF cable (without shield) (Note 4) | |||
I/O combination | I/O settable in units of 32 Nos. | |||
Error output | NPN open-collector transistor | |||
DeviceNet side |
Compatible network | DeviceNet Specifications Release 2.0 | ||
Transmission protocol |
Poll, Change of State, Cyclic | |||
Address setting | 0 to 63 (set by address setting switch) | |||
Transmission speed | 500kbps | 250kbps | 125kbps | |
Total extension | 100m | 250m | 500m | |
Transmission cable | Exclusive DeviceNet cable | |||
Ambient temperature | 0 to +55℃ (No dew condensation), Storage: -20 to +70℃ | |||
Ambient humidity | 10 to 90% RH, Storage: 10 to 90% RH | |||
Material | Enclosure: ABS | |||
Weight | Approx. 200g |
Notes:
1) | Mainly the S-LINK Vsystem side specifications are given above. The DeviceNet side conforms to DeviceNet specifications. Please confirm the details from ODVA (Open DeviceNet Vendor Association). |
---|---|
2) | The current consumption value shown here is the total of the maximum current (D-G line only) supplied to the S-LINK V I/O units and the current consumption of the S-LINK V gateway controller. |
3) | This product is not equipped with any short-circuit protective function. For this reason, select a power supply unit having short-circuit protective function (fuse, etc.). |
4) | The VCTF cable is the vinyl cabtyre cable that conforms to the requirements of JIS C 3306 "Polyvinyl chloride insulated flexible cords." |
5) | EDS file is required before using this product. |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)