【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Static Control Devices > Static Control Devices > Pulse Air-gun Ionizer EC-G > Specifications
Type | Gun type |
---|---|
Model No. | EC-G02 |
Charge removal time | 0.5 sec. approx. or less (±1,000 V → ±100 V) (Note 2) |
Applicable fluid | Air (dried clean air) (Note 3) |
Supplied air flow | 300 ℓ/min. (ANR) or less |
Air pressure range | 0.05 to 0.50 MPa |
Supply voltage | Accessory AC adapter INPUT: 100-240 V AC ±10 % 50/60 Hz (OUTPUT: 24 V DC) |
Power consumption | 30 VA or less |
Discharge method | High-frequency AC method |
Pulse air mode | Pulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switch |
LED illumination mode | ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF) |
External input | Ionized air emission operation ON / OFF using OR control with trigger switch Ionized air emission operation ON: Short-circuited to COM (-) Ionized air emission operation OFF: Open |
Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), AC adapter: 0 to +40 ℃ +32 to +104 ℉ |
Ambient humidity | 35 to 65 % RH (No dew condensation allowed) |
Weight | 270 g approx. (main unit only) |
Accessories | AC adapter: 1pc. Exclusive intermediate cable (oil-resistant, heat-resistant, bending-resistant type) length 2m 6.562 ft: 1 pc. Straight joints ・Tube outer diameter ø8-ø8mm ø0.315-ø0.315 in compatible type: 1 pc. (Note 4) ・Tube outer diameter ø8-ø6mm ø0.315-ø0.236 in compatible type: 1 pc. Connector connection terminal (Manufactured by Molex): 3 pcs. |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|---|
2) | Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa. |
3) | Dried clean air is the air passing through air dryer (dew point -20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.) |
4) | At the time of shipment from the factory, ø8-ø8mm ø0.315-ø0.315 in type is attached. |
Type | Gun type |
---|---|
Model No. | EC-G01 |
Charge removal time (±1,000 V → ±100 V) |
Approx. 0.5 sec. or less (Note 1) |
Applicable fluid | Air (dried clean air) (Note 2) |
Supplied air flow | Max. 300 ℓ/min. (ANR) or less |
Air pressure range | 0.05 to 0.50 MPa |
Power supply voltage | Accessory AC adapter INPUT: 100 to 240 V AC ±10 % 50/60 Hz (OUTPUT: 24 V DC) |
Power consumption | 30 VA or less |
Discharge method | High-frequency AC-method |
Pulse air mode | Pulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switch |
LED illumination mode | ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF) |
Weight | 270 g approx. (main unit only) |
Notes:
1) | Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa. |
---|---|
2) | Dried clean air is the air passing through air dryer (dew point –20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.) |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)