【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Static Control Devices > Static Control Devices > Pulse AC Method Area Ionizer ER-X > Order guide

Pulse AC Method Area Ionizer ER-X

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Order guide

Charge removal characteristics

Cautions For Use

Order guide

Heads

Head connection cable is not supplied with the head. Please order it separately.

Type		Charge removal time (±1,000 V→±100 V)	Ion balance	Effective charge removal width	Model No.
Spot type		0.3 sec. or less (Note 1), 0.5 sec. or less (Note 2)	±30 V or less (Note 2, 3)	50 mm 1.969 in approx.	ER-X001 (Note 4)
Bar type		1 sec. or less (Note 2)		80 mm 3.150 in approx.	ER-X008 (Note 4)
	High and low temperature resistant			80 mm 3.150 in approx.	ER-X008HC (Note 5)
				160 mm 6.299 in approx.	ER-X016
	High and low temperature resistant			160 mm 6.299 in approx.	ER-X016HC (Note 5)
				320 mm 12.598 in approx.	ER-X032
	High and low temperature resistant			320 mm 12.598 in approx.	ER-X032HC (Note 5)
				480 mm 18.898 in approx.	ER-X048
	High and low temperature resistant			480 mm 18.898 in approx.	ER-X048HC (Note 5)
				640mm 25.197 in approx.	ER-X064
	High and low temperature resistant			640mm 25.197 in approx.	ER-X064HC (Note 5)

Note 1:	Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge frequency 50 Hz and air supply 60 ℓ/min.(0.3 MPa).
Note 2:	Typical value in condition of discharge distance 100 mm 3.937 in (ER-X001: 50 mm 1.969 in), center of the product, discharge frequency 50 Hz (ER‑X□HC:30 Hz) and no air supply.
Note 3:	Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.
Note 4:	The ER-X001 and ER-X008 must be combined with the new-type ER-XC02 controller (produced from April 2014 on). Refer to "Identification of previous-type and new-type controllers and for the combination with the head".
Note 5:	The ER-X□HC high / low temperature resistant type head can be used under temperatures from -60 to +200 ℃ -76 to +392 ℉. Be sure to use this head in combination with the new-type controller, ER-XC02 (produced from April 2016 on). Refer to "Identification of previous-type and new-type controllers and for the combination with the head".

Controller

Please order power cable or AC adapter separately.

Type	Appearance	Model No.	Number of heads connected	Output
Standard type		ER-XC02	Max. 2 units	PhotoMOS relay

Head connection cable

Head connection cable is not supplied with the head. Please order it separately.

Model No.	Description
ER-XCCJ2H	Length: 2 m 6.562 ft Net weight: 120 g approx.	Cabtyre cable with both connector
ER-XCCJ5H	Length: 5 m 16.404 ft Net weight: 290 g approx.
ER-XCCJ10H (Note)	Length: 10 m 32.808 ft Net weight: 560 g approx.