【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > Service & Support > FA Technical Support > Glossary of FA Sensors > Photoelectric Sensors > Sensing range / Distance to convergent point
The distance which can be set between the emitter and the receiver under the stable sensing condition. |
The distance which can be set between the emitter and the receiver under the stable sensing condition. |
The distance which can be set between the sensor and the standard sensing object (normally, white nonglossy paper) under the stable sensing condition. |
With the convergent reflective type sensor or the mark sensor, sensitivity is not proportional to the setting distance and the maximum sensitivity point is at an intermediate position. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)