【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > Service & Support > FA Technical Support > Technical Guide (FA Sensors) > Definition of Light Curtain and Area Sensor Sensing Heights
|
Sensing height (protective height) refers to the range where minimum sensing object can be stably detected.
Please note that the definitions of the sensing heights (protective heights) vary according to the models.
Sensing height (protective height) is the same length as the light curtain body.
|
The sensing height refers to the distance from the center of the topmost end beam axis to the center of the bottommost end beam axis of the light curtain.
|
The "sensing height (protective height)" of the light curtain refers to the range where minimum sensing object can be stably detected. However, when the detectable range exceeds the light curtain body (sensor length), a "non sensing area" that cannot protect is produced at the top and bottom of the light curtain. Therefore, we have obtained a standard certification just for the sensing height, limited to the range within the sensor body length. <Example: SF2B series>In the case of a 20 mm 0.787 in beam pitch In the case of a 40 mm 1.575 in beam pitch |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)