AUTOMATION
CONTROLS

Search
Discontinued
Products



Pulse AC Method Area Ionizer ER-X

Order guide

Order guide

Heads

Head connection cable is not supplied with the head. Please order it separately.

Type Appearance Charge removal time
(±1,000 V→±100 V)		 Ion balance Effective
charge
removal
width		 Model No.
Spot type 0.3 sec. or less
(Note 1),
0.5 sec. or less
(Note 2)		 ±30 V or less
(Note 2, 3)		 50 mm
1.969 in
approx.		 ER-X001
(Note 4)
Bar
type		   1 sec. or less
(Note 2)		 80 mm
3.150 in
approx.		 ER-X008
(Note 4)
High and low
temperature
resistant		 ER-X008HC
(Note 5)
  160 mm
6.299 in
approx.		 ER-X016
High and low
temperature
resistant		 ER-X016HC
(Note 5)
  320 mm
12.598 in
approx.		 ER-X032
High and low
temperature
resistant		 ER-X032HC
(Note 5)
  480 mm
18.898 in
approx.		 ER-X048
High and low
temperature
resistant		 ER-X048HC
(Note 5)
  640mm
25.197 in
approx.		 ER-X064
High and low
temperature
resistant		 ER-X064HC
(Note 5)
Note 1: Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge frequency 50 Hz and air supply 60 ℓ/min.(0.3 MPa).
Note 2: Typical value in condition of discharge distance 100 mm 3.937 in (ER-X001: 50 mm 1.969 in), center of the product, discharge frequency 50 Hz (ER‑X□HC:30 Hz) and no air supply.
Note 3: Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.
Note 4: The ER-X001 and ER-X008 must be combined with the new-type ER-XC02 controller (produced from April 2014 on).
Refer to "Identification of previous-type and new-type controllers and for the combination with the head".
Note 5: The ER-X□HC high / low temperature resistant type head can be used under temperatures from -60 to +200 ℃ -76 to +392 ℉. Be sure to use this head in combination with the new-type controller, ER-XC02 (produced from April 2016 on).
Refer to "Identification of previous-type and new-type controllers and for the combination with the head".

Controller

Please order power cable or AC adapter separately.

Type Appearance Model No. Number of heads
connected		 Output
Standard type ER-XC02 Max. 2 units PhotoMOS relay

Head connection cable

Head connection cable is not supplied with the head. Please order it separately.

Appearance Model No. Description
ER-XCCJ2H Length: 2 m 6.562 ft
Net weight: 120 g approx.		 Cabtyre cable with both connector
ER-XCCJ5H Length: 5 m 16.404 ft
Net weight: 290 g approx.
ER-XCCJ10H
(Note)		 Length: 10 m 32.808 ft
Net weight: 560 g approx.

Note: Cannot be used with the high and low temperature resistant type head ER-X□HC.

Return to top

Order guide
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)