Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Programmable Controllers / Interface Terminal
> Programmable Controllers / Interface Terminal
> Motion Controller GM1
> Part Number
> AGM1AD8
AGM1AD8 | Motion Controller GM1
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | AGM1AD8 |
| Part Number | AGM1AD8 |
| Product | Analog input unit |
| Product name | Motion Controller GM1 |
As of May 03, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | AGM1AD8 |
| Part Number | AGM1AD8 |
General specifications
| Item | Specifications |
|---|---|
| Rated voltage | 24 V DC |
| Operating voltage range | 20.4 to 28.8 V DC |
| Allowable momentary power failure time | 10 ms |
| Operating ambient temperature | 0 to +55℃ |
| Storage ambient temperature | -40～+70 ℃ |
| Operating ambient humidity | 10 to 95 % RH (at +25 ℃, no condensation or icing) |
| Storage ambient humidity | 10 to 95 % RH (at +25 ℃, no condensation or icing) |
| Dielectric strength (Leakage current: 5 mA) | 500 V AC for one minute *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance. |
| Insulation resistance (Test voltage: 500 V DC) | 100 MΩ or more *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance. |
| Vibration resistance | Compliant with JIS B 3502, IEC 61131-2 5 to 8.4 Hz, half amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 10 sweeps each in X, Y and Z directions (1 octave/min) |
| Shock resistance | Compliant with JIS B 3502, IEC 61131-2 147 m/s2, 3 times each in the X, Y, Z directions |
| Noise resistance | 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal) |
| Atmosphere | Free of corrosive gases No excessive dust |
| European EU Standards | EMC: EN 61131-2 RoHS: EN IEC 63000 |
| Overvoltage category | Category II |
| Pollution degree | 2 |
| Weight (main unit) | Approx. 150 g (including the terminal block) |
| Consumption current | 160 mA or less |
Input Specifications of the Analog
| Item | Specifications |
|---|---|
| No. of input points | 8 ch |
| Input range (resolution) | Voltage: -10 to +10 V DC (Resolution: 1/64,000) 0 to +10 V DC (Resolution: 1/32,000) -5 to +5 V DC (Resolution: 1/64,000) 0 to +5 V DC (Resolution: 1/32,000) +1 to +5 V DC (Resolution: 1/25,600) *The full scale (F.S.) on the accuracy is from 0 to +5 V. Current: 0 to +20 mA (Resolution: 1/32,000) +4 to +20 mA (Resolution: 1/25,600) *The full scale (F.S.) on the accuracy is from 0 to +20 mA. |
| Conversion speed | 50 μs/ch |
| Exceeding the rated range | Possible to input up to the rated value ± 2% *When a value exceeding the rated value ±2% is set, the input is rounded to a value equivalent to the rated value ±2%. |
| Total accuracy | ±0.2 %F.S. or less (at +25 ℃) ±0.4 %F.S. or less (at 0 to +55 ℃) |
| Input impedance | Voltage input: Approximately 1 MΩ; current input: Approximately 250 Ω |
| Absolute max. input | Voltage input: -15 V to +15 V; current input: -30 mA to +30 mA |
| Insulation method | Between input terminals and internal circuit: Photocoupler and isolated DC/DC converter Between channels: Non-insulated |
| Conversion execution / nonexecution channel settings | Possible to make non-converted channel settings. |
| Input range selection | Possible to make settings on a channel-by-channel basis |
| Average processing | Number of averaging times: Setting range of 2 to 60,000 times Time average: Time setting range of 1 to 1,500 ms Moving average: Setting range of 2 to 2,000 times |
| Offset / Gain settings | A desired value within the digital output range can be set for the offset value. Setting range: -3,000 to +3,000 A desired value within the digital output range can be set for the gain value. Setting range: +9,000 to +11,000 (90 % to 110 %) |
| Scale conversion settings | A desired value within the digital output range can be set for the scale conversion setting value. Setting range: -32768 to +32767 |
| Upper limit / lower limit comparison | Output if the value is outside the preset upper limit or lower limit. Setting range: -32768 to +32767 |
| Max. / Min. hold | Holding max. / min. values sampled |
| Disconnection detection | Disconnection detection is possible for the following ranges. Possible to select auto or manual resetting. ・ 1 to 5 V range (Detection level: 0.7 V or less) ・ 4 to 20 mA range (Detection level: 2.8 mA or less.) |
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
