AUTOMATION
CONTROLS

Search
Discontinued
Products


FX-551-C2 | Digital Fiber Sensor FX-550


Digital Fiber Sensor FX-550

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


Product Number FX-551-C2
Part Number FX-551-C2
Product Digital Fiber Sensor
Details Amplifiers Cable type
Product name Digital Fiber Sensor FX-550

As of June 21, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number FX-551-C2
Part Number FX-551-C2
Applicable regulations CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Supply voltage 12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Power consumption Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current : 100 mA
・Applied voltage : 30 V DC or less (between output and 0 V)
・Residual voltage : 2 V or less (at maximum sink current)
Output:Output operation Switchable either Light-ON or Dark-ON by L/D mode
Output:Short-circuit protection Incorporated
Response time FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
Sensitivity setting 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light sensitivity setting Incorporated, 4 steps
Incident light intensity display range FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Timer function Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer function:Timer period Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Different frequency interference prevention function Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
Protection IP40(IEC)
Ambient temperature -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element (modulated) Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Material Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
Cable 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
Weight Net weight : 55 g approx., Gross weight : 90 g approx.
Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Return to top

Accessories (Option)

Super Quality Fiber
Product Number FD-30
Part Number FD-30
Product Reflective type Fiber
Details Super Quality Fiber
Product name Super Quality Fiber
Threaded Type Fiber
Product Number FD-31
Part Number FD-31
Product Reflective type Fiber
Details Threaded Type Fiber
Product name Threaded Type Fiber
Threaded Type Fiber
Product Number FD-31W
Part Number FD-31W
Product Reflective type Fiber
Details Threaded Type Fiber
Product name Threaded Type Fiber


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)