AUTOMATION
CONTROLS

Search
Discontinued
Products



FX-551L3-P-C2 | Digital Fiber Sensor FX-550L


Digital Fiber Sensor FX-550L

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  

Product Number FX-551L3-P-C2
Part Number FX-551L3-P-C2
Product name Digital Fiber Sensor FX-550L

As of October 16, 2021
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number FX-551L3-P-C2
Part Number FX-551L3-P-C2
Regulatory compliance EMC Directive, RoHS Directive
Supply voltage 12 to 24 V DC +10-15% Ripple P-P 10 % or less
Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 720 mW or less (current consumption 30 mA or less at 24 V supply voltage)
Communication output (C/Q):IO-Link communication IO-Link Specification V1.1
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Baud rate COM3 (230.4 kbps)
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Process data 4 byte
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Minimum cycle time 1.0 ms
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Control output (DO) PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (Note) (at maximum source current)
(Note:)In case of using the cable (cable length 2 m 6.562 ft).
Control output (DO):Output operation Switchable either Light-ON or Dark-ON by L/D mode
Control output (DO):Short-circuit protection Incorporated
Response time STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable
Sensitivity setting 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light sensitivity setting Incorporated, 4 steps
Incident light intensity display range STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999
Timer function Incorporated with variable OFF-delay / ON-delay / One-shot, switchable either effective or ineffective
Timer function:Timer period 0.1 to 999.9 ms approx., in units of 0.1 ms approx.
Different frequency interference prevention function Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1: 0.8 ms or less, F-2: 0.9 ms or less, F-3: 1.0 ms or less, F-4: 1.7 ms or less
(Note:)This function increases the hysteresis. Check the sensing condition when using the function.
Protection IP40 (IEC)
Ambient temperature -10 to +55℃ +14 to +131℉ (If 4 to 7 units are mounted in cascade: -10 to +50℃ +14 to +122℉ or if 8 to 16 units are mounted in cascade: -10 to +45℃ +14 to +113℉) (No dew condensation or icing allowed), Storage: -20 to +70℃ -4 to +158℉
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element (modulated) Red LED (Peak emission wavelength: 660 nm 0.026 mil)
Material Enclosure, Case cover: Polycarbonate, Switch: Polyacetal
Cable 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 20 m 65.617 ft is possible with 0.3 mm2, or more, cable.
(Condition of CE compliance: less tan 20 m 65.617 ft) (however, supply voltage 12 V DC or more)
Weight Net weight: 55 g approx., Gross weight: 80 g approx.
Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23℃ +73.4℉.

Return to top

Accessories (Option)

Super Quality Fiber
Product Number FD-30
Part Number FD-30
Product Reflective type Fiber
Details Super Quality Fiber
Product name Super Quality Fiber
Threaded Type Fiber
Product Number FD-31
Part Number FD-31
Product Reflective type Fiber
Details Threaded Type Fiber
Product name Threaded Type Fiber
Threaded Type Fiber
Product Number FD-31W
Part Number FD-31W
Product Reflective type Fiber
Details Threaded Type Fiber
Product name Threaded Type Fiber


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)