AUTOMATION
CONTROLS

Search
Discontinued
Products



Y3B(0.3mm pitch)

Features

  • Double top and bottom contacts construction

  • Time and effort can be reduced by delivering with lever open.

  • Wiring patterns can be placed under the connector.

  • Ni barrier with high resistance to solder creepage

Applications

  • Smartphones, DSC and other mobile devices

 

Characteristics

The followings show specifications, when using an applicable FPC (thickness 0.20 mm)

Item Specifications Conditions
Electrical
characteristics
Rated current 0.2A/pin contact (For Min. 61 pins: Max. 12A at total contacts)  
Rated voltage 50V AC/DC  
Dielectric strength 150V AC for 1 min. No short-circuiting or damage at a detection current of 1 mA when the specified voltage is applied for one minute.
Insulation resistance Min. 1,000MΩ (initial) Using 250V DC megger (applied for 1 min.)
Contact resistance Max. 100mΩ Based on the contact resistance measurement method specified by JIS C 5402.
Mechanical
characteristics
FPC holding force Min. 0.13N/pin contact × pin contacts (initial) Measurement of the maximum force applied until the inserted compatible FPC is pulled out in the insertion axis direction while the connector lever is closed
Environmental
characteristics
Ambient temperature –55 to +85°C No icing. No condensation.
Soldering heat resistance The initial specification must be satisfied electrically and mechanically. Reflow soldering:
Peak temperature: 260°C or less
(on the surface of the PC board around the connector terminals)
Soldering iron: 300°C within 5 sec. 350°C within 3 sec.
Storage temperature –55 to +85°C (product only)
–40 to +50°C (emboss packing)
No icing. No condensation.
Thermal shock resistance
(with FPC mated)
5 cycles,
insulation resistance Min. 100MΩ,
contact resistance Max. 100mΩ
Conformed to MIL-STD-202F, method 107G
Humidity resistance
(with FPC mated)
120 hours,
insulation resistance Min. 100MΩ,
contact resistance Max. 100mΩ
Conformed to IEC60068-2-78
Temperature 40±2°C, humidity 90 to 95% R.H.
Saltwater spray resistance
(with FPC mated)
24 hours,
insulation resistance Min. 100MΩ,
contact resistance Max. 100mΩ
Conformed to IEC60068-2-11
Temperature 35±2°C, saltwater concentration 5±1%
H2S resistance
(with FPC mated)
48 hours,
contact resistance Max. 100mΩ
Temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Lifetime
characteristics
Insertion and removal life 20 times Repeated insertion and removal: Min. 10 sec./time
Unit weight 61 pins: 0.10 g  

Return to top

Material and surface treatment

Part name Material Surface treatment
Molded portion Housing: LCP resin (UL94V-0)
Lever: LCP resin (UL94V-0)
Contact Copper alloy Contact portion; Base: Ni plating, Surface: Au plating
Terminal portion; Base: Ni plating, Surface: Au plating

Return to top

Related Information

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ

Related Information
Technology

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)