Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Timers / Counters / FA Componets > Counters > LC2H Total Counter(Discontinued Products) > Dimensions

LC2H Total Counter (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 29, 2023

Discontinued Products
Information

Rating/ Performance

Dimensions

Wiring/ Connection

Cautions For Use

Dimensions

Unit: mm in

1.Panel mounting type
2.PC board mounting type

1.Panel Mounting Type

1.One-touch installation type

External dimensions
General tolerance : ±1.0 ±0.39

Panel installation diagram

Note) When installing to a 4.5mm/ .177 inch thick panel, remove the rubber spacer first.

When installing the one-touch installation type model, make sure that the installation spring does not pinch the rubber gasket.
To prevent the installation spring from pinching the rubber gasket:

1. Set the rubber gasket on both ends of the installation spring (left and right).
2. Confirm that the installation spring is not pinching the rubber gasket, and then insert and fix the installation spring in place from the rear of the timer unit.

2.Installation frame type

External dimensions
General tolerance: ±1.0 ±.039

Panel mounting diagram

Panel cut-out dimensions
The standard panel cut-out is shown below.
Use the mounting frame (ATH3803) and the rubber packing (ATH3804). (Only installation frame type.)

For connected installation (sealed installation)
(Only installation frame type.)

Notes)
1. Suitable installation panel thickness is 1 to 4.5 mm/ .039 to .177 inch.
2. Waterproofing will be lost when installing repeatedly (sealed installation).