AUTOMATION
CONTROLS

Search
Discontinued
Products



LH2H Preset Hour Meters

Dimensions

  • Unit: mm in

External dimensions

General tolerance : ±1.0 ±0.39

Panel cut out dimensions

The standard panel cut out is shown below.
Use the mounting frame (ATH3803) and the rubber gasket (ATH3804).
(Only installation frame type)

For connected installation
(sealed installation)
(Only installation frame type)

Notes: 1. Suitable installation panel thickness is 1 to 4.5 mm/ 0.39 to 0.177 inch. 2. Waterproofing will be lost when installing repeatedly (sealed installation).

When installing the one-touch installation type model, make sure that the installation spring does not pinch the rubber gasket.

To prevent the installation spring from pinching the rubber gasket:

1.Set the rubber gasket on both ends of the installation spring(left and right).
2.Confirm that the installation spring is not pinching the rubber gasket, and then insert and fix the installation spring in place from the rear of the timer unit.

Return to top

Related Information

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)