[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.
【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Timers / Counters / FA Componets > Hour Meters > TH63/64 Hour Meters (Half Size)(Discontinued Products) > Cautions For Use
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
To prevent injury and accidents, be sure to observe the following instructions.
Make sure to read the operating instructions and the following precautions for use before installation, operation, maintenance, or inspection. Before using the product, the users must have a thorough understanding of the equipment, safety information, and miscellaneous precautions for its use.
[Warning]
Indicates a possible hazard that will result in death or serious physical injury of the operator in the event of incorrect handling.
[Caution]
Indicates a possible hazard that will result in physical injury of the operator or only property damage in the event of incorrect handling.
Frequency is specified for AC motor-driven hour meters. Before installing, be sure to check your local power frequency.
|
Note : | Make the connection with the accompanying flat connector first and then with the hour meter's terminal (#187). In such case, be sure to cover the connection with the accompanying insulating sleeve. |
---|
|
Note : | Solder the lead wires in position. |
---|
If the number indications are off before use, press reset button and confirm that all zeroes "0" are displayed.
Exercise due caution as an insufficient amount of pressure on reset button may result in abnormal readings.
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)