AUTOMATION
CONTROLS

Search
Discontinued
Products



TH63/64 Hour Meters (Half Size) (Discontinued Products)

Dimensions

  • Unit: mm in

General tolerance: ±0.5 ±.020

Panel cutout dimensions

Mounting

  • Cut a 22.2 +0.3/0 x 45 +0.6/0 mm (.874 +.012/0 x 1.772 +.024/0 inch) opening in the panel.
  • Swing the mounting spring to the rear of the hour meter and fit the hour meter into the panel opening. (There is no need to detach the mounting spring from the hour meter.) If the panel is 5 to 9 mm .197 to .354 inch thick, move the mounting spring to the other hole toward the rear of the hour meter.
  • Swing the mounting spring to the front of the hour meter to secure the hour meter to the panel.
  • Wire the supplied quick connectors and connect to the hour meter. Be sure to use the supplied insulating sleeves to cover the connectors.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)