【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Measurement Sensors > Measurement Sensors > Contact-Type Digital Displacement Sensor HG-S > Order guide
|
Type | Appearance | Resolution | Measurement range |
Model No. | |
---|---|---|---|---|---|
10 mm 0.394 in type (Note 1) |
General purpose |
0.5μm 0.02 mil |
10mm 0.394 in (Note 2) |
HG-S1010-AC | |
High precision |
0.1μm 0.004 mil |
HG-S1110-AC |
Notes :
1) | Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
---|---|
2) | The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm 0.004 in or more. |
Type | Appearance (Note 1) |
Resolution | Measurement range |
Model No. | ||
---|---|---|---|---|---|---|
10 mm 0.394 in type |
General purpose |
Standard | 0.5μm 0.02 mil |
10mm 0.394 in |
HG-S1010 | |
Low measuring force (Note 2) |
HG-S1010R | |||||
High precision |
Standard | 0.1μm 0.004 mil |
HG-S1110 | |||
Low measuring force (Note 2) |
HG-S1110R | |||||
32 mm 1.260 in type |
General purpose |
Standard | 0.5μm 0.02 mil |
32mm 1.260 in |
HG-S1032 | |
50 mm 1.969 in type |
General purpose |
Standard | 0.5μm 0.02 mil |
50mm 1.969 in |
HG-S1050 (Note 3) |
Notes:
1) | The image shows the standard type only. |
---|---|
2) | The low measuring force type does not have a rubber bellows. |
3) | Always connect the 50 mm 1.969 in type (HG-S1050) to an HG-SC□ controller manufactured February 2019 or later. |
Designation | Appearance | Length | Model No. |
---|---|---|---|
Straight connector |
3 m 9.843 ft |
CN-HS-C3 | |
7 m 22.966 ft |
CN-HS-C7 | ||
10 m 32.808 ft |
CN-HS-C10 | ||
20 m 65.617 ft |
CN-HS-C20 | ||
L-shaped connector (Note 1) |
3 m 9.843 ft |
CN-HS-C3L | |
7 m 22.966 ft |
CN-HS-C7L | ||
10 m 32.808 ft |
CN-HS-C10L | ||
20 m 65.617 ft |
CN-HS-C20L |
Note 1: Not compatible with air-driven type sensor heads (HG-S1010-AC / HG-S1110-AC).
Up to 15 slave units can be connected per master unit.
Type | Appearance | Output | Number of connectable controllers | Model No. | |
---|---|---|---|---|---|
Master unit | High performance type (analog current + input / output) |
NPN output | Up to 15 slave units can be connected per master unit. (Note) |
HG-SC101 | |
PNP output | HG-SC101-P | ||||
Slave units | High performance type (analog current + input / output) |
NPN output | HG-SC111 | ||
PNP output | HG-SC111-P | ||||
Standard type (input / output) |
NPN output | HG-SC112 | |||
PNP output | HG-SC112-P | ||||
Wire-saving type | - | HG-SC113 |
Note: When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit
End plates are required for connection of controllers.
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)