【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Dual Display Digital Pressure Sensor [For Gas] DP-100 Ver.2
Dimensions
DP-10□(-P)
Sensor |
|
|
DP-10□-M(-P)
DP-11□-E-P-J
MS-DP1-1
Sensor mounting bracket (Optional)
|
Material:
Cold rolled carbon steel (SPCC)
(Trivalent uni-chrome plated)
Two M3 (length 6 mm 0.236 in) screws with washers are attached |
|
Assembly dimensions
Mounting drawing with DP-10□(-P) |
|
|
MS-DP1-5
Sensor mounting bracket (Optional) |
|
Material:Stainless steel (SUS304)
Two M3 (length 6 mm 0.236 in) screws with washers are attached |
|
Assembly dimensions
Mounting drawing with DP-10□-M(-P) |
|
|
MS-DP1-2
MS-DP1-3
Panel mounting bracket (Optional),
Front protection cover (Optional)
Assembly dimensions
Mounting drawing with DP-10□(-P)
|
Material:
Polyacetal (Panel mounting bracket)
Polycarbonate (Front protection cover)
Notes:
1) DP-10□-E-P has a G1/8 male thread. DP-10□-N(-P) has a NPT1/8 male thread.
2) In case of DP-10□-E-P, the dimension 7.5 become to be 10, the dimension 9.5 become to be 7 and the dimension 12 become to be 14. |
|
Panel cut-out dimensions
When 1 unit is installed |
|
Note:
The panel thickness should be 1 to 6 mm 0.039 to 0.236 in. |
|
MS-DP1-4
Panel mounting bracket (Optional)
Assembly dimensions
Mounting drawing with DP-10□(-P)
|
Material:
Nylon 6 (Panel mounting bracket body)
Stainless steel (SUS304) (Panel mounting bracket)
Cold rolled carbon steel (SPCC) (Trivalent uni-chrome plated) (Spacer)
Notes:
1) DP-10□-E-P has a G1/8 male thread. DP-10□-N(-P) has a NPT1/8 male thread.
2) The panel tickness should be 1 to 32 mm 0.039 to 1.260 in. |
|
Panel cut-out dimensions |
|
Note:
The panel thickness should be 1 to 3.2 mm 0.039 to 0.126 in. |
|
MS-DP1-7
Conversion bushing (Optional)
|
Material: Brass (Nickel plated)
Weight: 10g approx. |
|
MS-DP1-FM
Flat attachment (Optional)
Assembly dimensions
Mounting drawing with DP-10□-M(-P)
|
Material:
Polybutylene terephthalate (PBT) (Glass fiber reinforced) (Enclosure)
Stainless steel (SUS303) (Pressure port)
Hydrogenated Nitrile Butadiene Rubber (H-NBR) (O-ring)
Weight: 15g approx.(flat attachment only)
Two M3 (length 8mm 0.315 in) screws, two M4 (length 20mm 0.787 in screws are attached. |
|
MS-DP1-FR
MS-DP1-FN
MS-DP1-FE
Flat attachment (Optional)
Assembly dimensions
Mounting drawing with DP-10□-M(-P)
|
Note:
MS-DP1-FR has a Rc1/8 female thread.
MS-DP1-FN has a NPT1/8 female thread.
Material:
Polybutylene terephthalate (PBT) (Glass fiber reinforced) (Enclosure)
Stainless steel (SUS303) (Pressure port)
Hydrogenated Nitrile Butadiene Rubber (H-NBR) (O-ring)
Weight: 25g approx. (flat attachment only)
Two M3 (length 8mm 0.315 in screws, two M4 (length 20mm 0.787 in screws are attached. |
|
CN-14A-C□
CN-14A-R-C□
Connector attached cable (Optical, CN-14A-C2 is attached to the sensor)
・Length L
Model No. |
Cable length L (mm in) |
CN-14A(-R)-C1 |
1,000 39.370 |
CN-14A(-R)-C2 |
2,000 78.740 |
CN-14A(-R)-C3 |
3,000 118.110 |
CN-14A(-R)-C5 |
5,000 196.850 |
Return to top
Return to top