【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Head-separated Dual Display Digital Pressure Sensor [For Gas] DPH-100 / DPC-100
I/O Circuit and Wiring diagrams
DPC-101
I/O circuit diagram
Notes:
| 1) |
Select and use the auto-reference function and remote zero-adjustment function. |
| 2) |
Set the output load resistance during analog current output to 250 Ω (max.) |
| 3) |
Note that a voltage of 5 V or higher is generated during analog current output. |
| Symbols･･･ |
D1 to D4 : Reverse supply polarity protection diode
ZD1 to ZD3 : Surge absorption zener diode
Tr1, Tr2 : NPN output transistor |
| For independent use of sensor head |
Notes:
| 1) |
In case the sensor head is used independently, insulate the white lead wire (terminal No.4) and keep it open. |
| 2) |
When the sensor head is used independently, devices connected to the analog output must have an input impedance set at 50 kΩ or more. |
| Symbols･･･ |
D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode |
Terminal arrangement diagram
|
|
| Connector for power supply / I-O cable (CN1) |
[1] +V
[2] Analog voltage / current output
[3] 0 V
[4] Comparative output 1
[5] Comparative output 2
[5] External input (auto-reference function / remote zero-adjustment function)
| Connector for sensor head (CN2) |
[1] Sensor head power supply
[2] Analog voltage input
[3] 0 V
[4] Model discrimination signal |
DPC-101-P
I/O circuit diagram
Notes:
| 1) |
Select and use the auto-reference function and remote zero-adjustment function. |
| 2) |
Set the output load resistance during analog current output to 250 Ω (max.) |
| 3) |
Note that a voltage of +5 V or higher is generated during analog current output. |
| Symbols･･･ |
D1 to D4 : Reverse supply polarity protection diode
ZD1 to ZD3 : Surge absorption zener diode
Tr1, Tr2: PNP output transistor |
| For independent use of sensor head |
Notes:
| 1) |
In case the sensor head is used independently, insulate the white lead wire (terminal No.4) and keep it open. |
| 2) |
When the sensor head is used independently, devices connected to the analog output must have an input impedance set at 50 kΩ or more. |
| Symbols･･･ |
D : Reverse supply polarity protection diode
ZD: Surge absorption zener diode |
Terminal arrangement diagram
|
|
| Connector for power supply / I-O cable (CN1) |
[1] +V
[2] Analog voltage / current output
[3] 0 V
[4] Comparative output 1
[5] Comparative output 2
[6] External input (auto-reference function / remote zero-adjustment function)
| Connector for sensor head (CN2) |
[1] Sensor head power supply
[2] Analog voltage input
[3] 0 V
[4] Model discrimination signal |
Return to top
Return to top
Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Pressure Sensors / Flow Sensors
> Pressure Sensors / Flow Sensors
> Head-separated Dual Display Digital Pressure Sensor [For Gas] DPH-100 / DPC-100
> I/O Circuit and Wiring diagrams
