AUTOMATION
CONTROLS

Search
Discontinued
Products



Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

Specifications

Controllers

Type For compound pressure / vacuum pressure For positive pressure
Model No. DPS-401 DPS-402
CE marking directive compliance EMC Directive, RoHS Directive
Applicable sensor head Compound pressure : DPH-101□
Vacuum pressure : DPH-103□
Positive pressure : DPH-102□
Rated pressure range Compound pressure: -100.0 to +100.0kPa
Vacuum pressure: 0 to -101kPa
Positive pressure: 0 to +1.000MPa
Display / set pressure range Compound pressure: –199.9 to +199.9 kPa
Vacuum pressure: +101.3 to –101.3 kPa
Positive pressure: –1.050 to +1.050 MPa
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption
(Note 2)
Normal operation: 650 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
ECO mode: 500 mW or less (Current consumption 20 mA or less at 24 V supply voltage)
Sensor head supply voltage Same as supply voltage
Sensor head input Input voltage range: 1 to 5 V DC (over rated pressure range)
Comparative outputs
(Comparative output 1, 2)
NPN open-collector transistor
・Maximum sink current: 50 mA (Note 3)
・Applied voltage: 30 V DC or less (between comparative output and 0 V)
・Residual voltage: 1.5 V or less (Note 4) [at 50 mA (Note 3) sink current]
  Output operation NO / NC, selectable by jog switch
Hysteresis Minimum 0 digit, variable by hysteresis setting
Repeatability With compound pressure type connected: within ±0.2 % F.S. (±4 digits), With vacuum / positive pressure type connected: within ±0.2 % F.S. (±2 digits)
Response time 150 μs, 500 μs, 1 ms, 5 ms, 10 ms, 50 ms, 100 ms, 500 ms, selectable by jog switch
Ambient temperature –10 to +50℃ +14 to +122℉ (cascading 8 to 16 controllers: –10 to +45℃ +14 to +133℉) (No dew condensation or icing allowed), Storage: –20 to +70℃ –4 to +158℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Temperature characteristics Over ambient temperature range –10 to +50℃ +14 to +122℉: within ±0.5 % F.S. of pressure at +25℃ +77℉
Material Enclosure: Heat-resistant ABS, Protective cover: Polycarbonate, Jog switch: ABS, MODE key: Acrylic
Weight Net weight:20 g approx.

Note 1:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.
Note 2:Excluding current consumption of the applicable pressure sensor head.
Note 3:25 mA max. if 5 or more controllers are connected together.
Note 4:In case of using the quick-connection cable (cable length: 5 m 16.404 ft)(optional)
Note 5:The cable for controller connection is not supplied as an accessory. Make sure to use the quick-connection cables (optional) given below.
Main cable (4-core): CN-74-C1 (cable length: 1m 3.281 ft), CN-74-C2 (cable length: 2 m 6.562 ft), CN-74-C5 (cable length: 5 m 16.404 ft)
Sub cable (2-core): CN-72-C1 (cable length: 1m 3.281 ft), CN-72-C2 (cable length: 2 m 6.562 ft), CN-72-C5 (cable length: 5 m 16.404 ft)
Note 6:The values specified above are applied only to the controller.

Sensor heads

Type Compound pressure Positive pressure Vacuum pressure
±100 kPa type 1 MPa type –101 kPa type
Model No.
(Note 3)
DPH-101(-R) DPH-101-M3(-R) DPH-101-M5(-R) DPH-102 DPH-102-M5(-R) DPH-103(-R) DPH-103-M3(-R) DPH-103-M5(-R)
CE marking directive compliance EMC Directive, RoHS Directive
Type of pressure Gauge pressure
Rated pressure range –100.0 to +100.0 kPa 0 to +1.000 MPa 0 to –101.0 kPa
Pressure withstandability 500kPa 1.5MPa 500kPa
Applicable fluid Air, non-corrosive gas
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 15 mA or less
Ambient temperature 0 to +50℃ +32 to +122℉ (No dew condensation allowed), Storage: –10 to +60℃ +14 to +140℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Temperature characteristics Over ambient temperature range 0 to +50℃ +32 to +122℉: within ±2 % F.S. of detected pressure at +25℃ +77℉
Material Front case: PBT, Rear case: PBT (glass fiber reinforced), Pressure port: Stainless steel (SUS303), O-ring: NBR
Pressure element: Silicon diaphragm, PPS
Cable 0.2 mm2 4-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable)
Cable extension Extension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable.
Weight Net weight DPH-10□(-R): Head 10 g approx. / Cable 40 g approx., DPH-10□-M3/M5(-R): Head 6 g approx. / Cable 40 g approx.
Gross weight DPH-10□(-R): 80 g approx., DPH-10□-M3/M5(-R): 70 g approx.
Accessory Connector (e-CON): 1 pc. (Note 4)

Note 1:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +25℃ +77℉.
Note 2:The sensor head can be used independently.
Note 3:Model No. having the suffix "-R" is bending-resistant cable type. The bending-resistant cable type of DPH-102 is not available.
Note 4:Connectors (e-CON) are available as spare parts. CN-EP2: 5 pcs.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)