【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Digital Fiber Sensor FX-410 > Order guide
|
Quick-connection cable is not supplied with the amplififier. Please order it separately.
Type | Appearance | Model No. | Emitting element |
Output |
---|---|---|---|---|
NPN Output |
FX-411 | Red LED | NPN open-collector transistor | |
FX-411B | Blue LED | |||
FX-411G | Green LED | |||
PNP Output |
FX-411P | Red LED | PNP open-collector transistor | |
FX-411BP | Blue LED | |||
FX-411GP | Green LED | |||
PNP Output |
FX-412(Note) | Red LED | NPN open-collector transistor | |
FX-412B(Note) | Blue LED | |||
FX-412G(Note) | Green LED |
(Note): | The FX-412□ has a threshold value adjuster that can be adjusted with your fingers. |
---|
Quick-connection cable is not supplied with the amplififier. Please order it separately.
Type | Model No. | Description | |
---|---|---|---|
Main cable (3-core) |
CN-73-C1 | Length: 1 m 3.281 ft | 0.2 mm2 3-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in |
CN-73-C2 | Length: 2 m 6.562 ft | ||
CN-73-C5 | Length: 5 m 16.404 ft | ||
Sub cable (1-core) |
CN-71-C1 | Length: 1 m 3.281 ft | 0.2 mm2 1-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in |
CN-71-C2 | Length: 2 m 6.562 ft | ||
CN-71-C5 | Length: 5 m 16.404 ft |
(Note): | The material of Quick-connection cable will be changed from production in March 2013, as soon as the previous ones are shipped out. ・Conductor cross-sectional area has been changed from 0.15mm2 to 0.2mm2. ・Sheath diameter has been changed from ø3.0mm to ø3.3mm. |
---|
|
|
End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.
Appearance | Model No. | Description |
---|---|---|
MS-DIN-E | When amplifiers are mounted in cascade, or when an amplifier moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. Two pcs. per set |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)