【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Bank Selection Unit FX-CH > Order guide

Bank Selection Unit FX-CH

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Order guide

Order guide

Bank selection units

Type	Appearance	Model No.	Description
NPN input		FX-CH	By using an external signal, this unit can change the bank channel settings for up to 16 sensors [of both the digital laser sensor LS-401(P) and digital fi ber sensor FX-301B/G/H(P) (blue / green / infrared)], all in a single step.
PNP input		FX-CH-P

Connectors

Designation	Model No.	Description
4-pin type snap male connector	SL-CP1 (Wihte) [10 pcs. per set]	For 0.08 to 0.2 mm² (conductor cross-section area) Wire diameter: ø0.7 to ø1.2 mm ø0.028 to ø0.047 in	This snap male connector is used to connect the channel changing input to the bank selection unit. The bank selection unit includes one SL-CP1.
	SL-CP2 (Black) [10 pcs. per set]	For 0.3 mm² (conductor cross-section area) Wire diameter: ø1.1 to ø1.6 mm ø0.043 to ø0.063 in
	SL-CP3 (Greenish blue) [10 pcs. per set]	For 0.5 mm² (conductor cross-section area) Wire diameter: ø1.7 to ø2.5 mm ø0.067 to ø0.098 in

Others

Designation	Appearance	Model No.	Description
Hook-up pliers for the snap male / female connector		SL-JPC	4-pin type hook-up connectors (SL-CP1, SL-CP2) can be connected in one grip.
SL-CP3 exclusive pliers		SL-JPE	4-pin type snap male connector (SL-CP3) can connected in one grip.

Quick-connection cables

Type	Model No.	Description
Main cable for FX-CH(-P) (Note)	CN-73-C1	Length: 1 m 3.281 ft	This quick-connection cable is utilized when connecting the digital laser sensor LS-401(P) and the digital fi ber sensor FX-301B/G/H(P) and the bank selection unit FX-CH(-P) together in side-by-side confi guration. 0.15 mm² 3-core cabtyre cable, with connector on one end Cable outer diameter: ø3 mm ø0.118 in
	CN-73-C2	Length: 2 m 6.562 ft
	CN-73-C5	Length: 5 m 16.404 ft

Note :	Use a sub cable to connect an amplifier. Refer to the LS series and FX-301B/G/H for details.

Main cable

CN-73-C□

End plates

Appearance	Model No.	Description
	MS-DIN-E [Two pcs. per set]	After the FX-CH(-P) and the digital laser sensors and the digital fiber sensors have been attached to the DIN rail, all of these devices must be secured firmly together by placing end plates at each of the ends and sandwiching the FX-CH(-P) and the fiber sensors in between. Ensure that these end plates are used for this purpose.