【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Bank Selection Unit FX-CH > Specifications

Bank Selection Unit FX-CH

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Specifications

Specifications

Type	NPN input	PNP input
Model No.	FX-CH	FX-CH-P
Applicable sensors	FX-301B/G/H(P), LS-401(P)
Supply voltage	12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption	25 mA or less (When all indicators light up)
Bank selection input	Low: 0 to 2 V DC (Source current: 0.5 mA Input impedance: 10 kΩ approx.) High: 5 V to +V DC, or open	High: 4 V to +V DC (Sink current: 0.5 to 3 mA Input impedance: 10 kΩ approx.) Low: 0 to 0.6 V DC, or open
Power indicator	Green LED (Lights up when the power is ON)
Transmission operation indicator	Green LED (Lights up when loaded, blinks → lights up when saved)
Pollution degree	3 (Industrial environment)
Ambient temperature	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
EMC	EN 61000-6-2, EN 61000-6-4
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Shock resistance	98 m/s² acceleration (10 G approx.) in X, Y and Z directions for fi ve times each
Material	Enclosure: Heat-resistant ABS
Connecting method	Connector (Note 2)
Cable length	Total length up to 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight	Net weight: 20 g approx., Gross weight: 25 g approx.
Dimensions	W10 x H27 x D64.5 mm W0.394 x H1.063 x D2.539 in
Accessory	SL-CP1 (4-pin type snap male connector): 1 pc.

Note 1 : Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.

Note 2 : The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)

Note 3 : Make sure that FX-CH(-P) should be mounted to a 35 mm 1.378 in width DIN rail.

Note 1 :	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Note 2 :	The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Note 3 :	Make sure that FX-CH(-P) should be mounted to a 35 mm 1.378 in width DIN rail.