【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Micro Photoelectric Sensors > Small U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54(Discontinued Products) > Specifications

Small U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54 (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	March 31, 2017

Discontinued Products
Information

Specifications

Dimensions

Circuit/ Wiring

Sensing characteristics

Cautions For Use

Specifications

Type		Small
Type		With cable	With connector
Model No.	NPN output	PM-□44	PM-□54
Model No.	PNP output	PM-□44P	PM-□54P
Sensing range		5 mm 0.197 in (fixed)
Minimum sensing object		0.8 x 1.8 mm 0.031 x 0.071 in opaque object
Hysteresis		0.05 mm 0.002 in or less
Repeatability		0.03 mm 0.001 in or less
Supply voltage		5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		15 mA or less
Output		<NPN output type> NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 0.7 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Output operation	Incorporated with 2 outputs: Light-ON / Dark-ON
Response time		Under light received condition: 20 µs or less, Under light interrupted condition: 100 µs or less (Response frequency: 1 kHz or more) (Note 2)
Operation indicator		Vermilion LED (lights up under light received condition)
Pollution degree		3 (Industrial environment)
Ambient temperature		–25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: –30 to +80 ℃ –22 to +176 ℉
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance		Fluorescent light: 1,000 ℓx at the light-receiving face
EMC		EN 60947-5-2
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
Shock resistance		15,000 m/s² acceleration (1,500 G approx.) in X, Y and Z directions for three times each
Emitting element		Infrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated)
Material		Enclosure: PBT, Slit cover: Polycarbonate, Terminal part [PM-□54(P) only]: Solder plated
Cable		0.09 mm² 4-core cabtyre cable, 1 m 3.281 ft long	-
Cable extension		Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight		Net weight: 15 g approx.	Net weight: 3 g approx.

Notes:

1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

2) The response frequency is the value when the disc, given in the figure below, is rotated.

1)	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2)	The response frequency is the value when the disc, given in the figure below, is rotated.