【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Hot Melt Glue Detector TH (Discontinued Products)
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
 |
September 30, 2017 |
|
|
Dimensions
TH-11CS
Spot type
Sensor head / TH-11 |
 |
|
Controller / TH-C1 |
 |
|
TH-12CS
TH-12CPS
Long sensing range type
Sensor head / TH-12 |
 |
|
Controller / TH-C2, TH-C2P |
 |
|
MS-TH-1
Sensor head mounting bracket for spot type (Accessory for TH-11)
 |
Material:Cold rolled carbon steel (SPCC)
Two M3 (length 25 mm 0.984 in) screws with washers are attached. |
|
Assembly dimensions
The drawing below shows MS-TH-1 mounted on TH-11 fitted with heat shield TH-B1 (accessory). |
 |
| Note:18 mm 0.709 in when the heat shield is not used. |
|
MS-TH-2
Sensor head mounting bracket for long sensing range type (Accessory for TH-12)
 |
Material: Cold rolled carbon steel (SPCC)
Two M3 (length 30 mm 1.181 in) screws with washers are attached. |
|
Assembly dimensions
The drawing below shows MS-TH-2 mounted on TH-12 fitted with heat shield TH-B2 (accessory) |
 |
| Note:25 mm 0.984 in when the heat shield is not used. |
|
OS-TH12
Slit mask for long sensing range type (Accessory for TH-12)
 |
| Material: Stainless steel (SUS304) |
|
Assembly dimensions |
 |
|
Return to top
Return to top
Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Particular Use Sensors
> Hot Melt Glue Detector TH(Discontinued Products)
> Dimensions
