【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



Water Detection Sensor EZ-10

Option

Option

Designation Model No. Description
Round slit mask OS-CX-05
(Slit size Ø0.5mm Ø0.020 in)		 Slit on one side / Sensing range: 200 mm 7.874 in
Slit on both sides / Sensing range: 10 mm 0.394 in
OS-CX-1
(Slit size Ø1mm Ø0.039 in)		 Slit on one side / Sensing range: 400 mm 15.748 in
Slit on both sides / Sensing range: 60 mm 2.362 in
OS-CX-2
(Slit size Ø2mm Ø0.079 in)		 Slit on one side / Sensing range: 1 m 3.281 ft
Slit on both sides / Sensing range: 250 mm 9.843 in
Rectangular
slit mask		 OS-CX-05x6
(Slit size 0.5 x 6mm 0.020 x 0.236 in)		 Slit on one side / Sensing range: 800 mm 31.496 in
Slit on both sides / Sensing range: 250 mm 9.843 in
OS-CX-1x6
(Slit size 1 x 6mm 0.039 x 0.236 in)		 Slit on one side / Sensing range: 1.3 m 4.265 ft
Slit on both sides / Sensing range: 600 mm 23.622 in
OS-CX-2x6
(Slit size 2 x 6mm 0.079 x 0.236 in)		 Slit on one side / Sensing range: 2 m 6.562 ft
Slit on both sides / Sensing range: 1.3 m 4.265 ft
Sensor mounting
bracket (Note 1)		 MS-CX2-1 Foot angled mounting bracket
(Two brackets are required.)
MS-CX2-2 Foot biangled mounting bracket
(Two brackets are required.)
MS-CX2-4 Protective mounting bracket
(Two brackets are required.)
MS-CX2-5 Back biangled mounting bracket
(Two brackets are required.)
MS-CX-3 Back angled mounting bracket
(Two brackets are required.)
Universal
sensor
mounting stand
(Note 2)		 MS-AJ1 Horizontal mounting type Basic assembly
MS-AJ2 Vertical mounting type
MS-AJ1-A Horizontal mounting type Lateral arm assembly
MS-AJ2-A Vertical mounting type
(Note 1)：The plug-in connector type sensor does not allow use of some sensor mounting brackets because of the protrusion of the connector.
(Note 2)：Refer to the MS-AJ series for details of the universal sensor mounting stand.

Round slit mask

OS-CX-口

Used for narrowing the beam for cases when detecting water or other substances inside slender pipes.
Fitted on the front face of the sensor with one-touch.

Rectangular slit mask

OS-CX-口×6

Used for narrowing the beam for cases when detecting water or other substances inside slender pipes.
Fitted on the front face of the sensor with one-touch.

Sensor mounting bracket

MS-CX2-1

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX2-2

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX2-4

Two M3 (length 14 mm 0.551 in) screws with washers are attached.

MS-CX2-5

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX-3

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

Universal sensor mounting stand

MS-AJ1

MS-AJ1-A

With the lateral arm, the sensor can sense from above a production line.

MS-AJ2

MS-AJ2-A

With the lateral arm, the sensor can sense from above a production line.

Return to top

Option
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE
Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)