【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Compact & Long Range Laser Distance Sensor HG-F1 > Specifications

Compact & Long Range Laser Distance Sensor HG-F1

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Specifications

Sensing characteristics

Cautions For Use

Specifications

Type			NPN output type	PNP output type
Model No.			HG-F13A-A-N	HG-F13A-A-P
Applicable regulations and certifications			CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, TÜV SÜD certification (USA, Canada)
Measurable range			250 to 3,000 mm 9.843 in to 118.110 in
Displayable range (Note 2)			200 to 3,300 mm 7.874 in to 129.921 in
Repeatability			10 mm 0.394 in or less (target object: sheet of white non-glossy paper measuring 200 × 200 mm 7.874 × 7.874 in)
Hysteresis			30 mm 1.181 in (default setting) Possible to vary up to 1 mm 0.039 in minimum in the PRO mode (Note 3)
Linearity			± 2% F.S. (Note 4) (at a measuring distance of 500 mm to 3,000 mm 19.685 in to 118.110 in)
Temperature characteristics			0.1% F.S./℃
Light source			Red semiconductor laser: Class 1 [IEC / EN / JIS / GB / KS / FDA(Note 5)] Maximum output: 0.39 mW, Peak emission wavelength: 680 nm 0.0268 mil
Beam diameter (Note 6)			Approx. ø10 mm ø0.394 in (typical) (at the measuring distance of 1,000 mm 39.370 in)
Supply voltage			24 V DC ±10%, Ripple P-P 10%
Power consumption (Note 7)			40 mA or less (at 24 V DC supply voltage)
Control output			NPN open-collector transistor • Maximum sink current: 50 mA • A pplied voltage: 30 V DC or less (Between control output to 0 V) • Residual voltage: 1.5 V or less (At 50 mA sink current) • Leakage current: 0.1 mA or less	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (At 50 mA source current) • Leakage current: 0.1 mA or less
	Output operation		Switchable between Light-ON / Dark-ON, (Default: Light-ON)
	Short-circuit protection		Incorporated (Auto reset type)
Analog output			Switchable between voltage output / current output (Default: voltage output)
	Analog voltage output	Output range(Note 9)	• In normal operation: 0 to +5 V Possible to set the distance range (Default: 250 to 3,000 mm 9.843 in to 118.110 in) • When alarm occurs: Last value is held or the range is set to 0 V on the near point side and to +5.2 V on the far point side.
	Analog voltage output	Output impedance	100 Ω
	Analog current output	Output range(Note 9)	• In normal operation: +4 to +20 mA Possible to set the distance range (Default: 250 to 3,000 mm 9.843 in to 118.110 in) • When alarm occurs: Last value is held or the range is set to 0 mA on the near point side and to +20.8 mA on the far point side.
	Analog current output	Output impedance	250 Ω or less
Response time			Switchable between 35 ms / 100 ms / 300 ms / 2,000 ms (Default: 100 ms)
External input			NPN non-contact input • Input condition Invalid: +8 to + V DC or Open Valid: 0 to +1.2 V DC • Input impedance: approx. 10 kΩ	PNP non-contact input • Input condition Invalid: 0 to +0.6 V DC or Open Valid: +4 to +V DC • Input impedance: approx. 10 kΩ
External input function			Switchable between zero set, teaching, or emission stop (Default: zero set)
Teaching function			Switchable between normal sensing mode (2-point / limit) or window comparator mode (1-point / 2-point / 3-point) (Default: Normal sensing mode)
Timer function			Switchable between OFF / ON delay / OFF delay / one-shot (Default: OFF)
Timer period			Switchable between 5 ms / 10 ms / 25 ms / 50 ms / 100 ms / 250 ms / 500 ms / 1,000 ms / 5,000 ms (Default: 5 ms)
Pollution degree			2
Overvoltage category			Category I
Ambient altitude (Note 8)			2,000 m 6561.680 ft or less
Environmental resistance		Protection	IP67 (IEC)
		Ambient temperature	-10 to +45 ℃ +14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉
		Ambient humidity	35 to 85% RH, Storage: 35 to 85% RH
		Ambient illuminance	Incandescent light: 3,000 ℓx or less at the light-receiving face
		Vibration resistance	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
		Shock resistance	500 m/s² acceleration (approx. 50 G) in X, Y and Z directions three times each
Cable			0.2 mm² 5-core composite cable, 2 m 6.562 ft long
Cable extension			Extension up to total 10 m 32.808 ft is possible with 0.3 mm², or more, cable
Material			Enclosure: Aluminum die-cast, Front cover: Acrylic, Cable: PVC
Weight			Net weight: approx. 85 g, Gross weight: approx. 130 g

Notes:

1)	Unless otherwise specified, measurement conditions are as follows: Power supply voltage of 24 VDC, ambient temperature of +20 ℃ +68 ℉, response time of 100 ms, and measuring distance of 1,000 mm 39.370 in. The target object is a 200 mm × 200 mm 7.874 in ×7.874 in white non-glossy paper. Perform measurement 30 minutes after turning on the power supply.
2)	When an object is detected, the range of numerical values that appear on the digital display is regarded as the displayable distance. When zero setting is performed, the displayable distance varies depending on the zero setting distance.
3)	Changing the hysteresis may result in unstable sensing. After making a change, perform operation check using actual equipment.
4)	F.S. (full scale) represents a range from 0 mm to 3,000 mm 0 in to 118.110 in.
5)	This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.
6)	The beam diameter is defined as 1/e² (approx. 13.5%) of the center light intensity. Due to leak light outside the defined range, the measurement values may be affected if the reflectance around the detecting point is higher than that of the detecting point.
7)	Analog output is not included.
8)	Do not use or store this product in environments where ambient air is pressurized to an air pressure higher than the atmospheric pressure at an altitude of 0 m.
9)	When the intensity of received light is unstable, the voltage is output as 0 V and the current is output as 0 mA.