【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Light Curtains / Safety Components > Safety Light Curtain Type 4 Korean Press Machine Compliant SF4B-03 Ver.2(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
Type | Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch) |
|||||
---|---|---|---|---|---|---|
Model No. (Note 2) | SF4B-F23-03 <V2> |
SF4B-F31-03 <V2> |
SF4B-F39-03 <V2> |
SF4B-F47-03 <V2> |
SF4B-F55-03 <V2> |
SF4B-F63-03 <V2> |
Number of beam channels | 23 | 31 | 39 | 47 | 55 | 63 |
Protective height (Note 2) |
230 mm 9.055 in |
310 mm 12.205 in |
390 mm 15.354 in |
470 mm 18.504 in |
550 mm 21.654 in |
630 mm 24.803 in |
Current consumption | Emitter: 80 mA or less, Receiver: 120 mA or less |
Emitter: 100 mA or less, Receiver: 160 mA or less |
||||
PFHD | 2.4 × 10–9 | 2.8 × 10–9 | 3.2 × 10–9 | 3.6 × 10–9 | 4.0 × 10–9 | 4.4 × 10–9 |
MTTFD | 100 years or more | |||||
Net weight (Total of emitter and receiver) |
510 g approx. | 660 g approx. | 810 g approx. | 960 g approx. | 1,100 g approx. | 1,260 g approx. |
Type | Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch) |
||||
---|---|---|---|---|---|
Model No. (Note 2) | SF4B-F71-03 <V2> |
SF4B-F79-03 <V2> |
SF4B-F95-03 <V2> |
SF4B-F111-03 <V2> |
SF4B-F127-03 <V2> |
Number of beam channels | 71 | 79 | 95 | 111 | 127 |
Protective height (Note 2) |
710 mm 27.953 in |
790 mm 31.102 in |
950 mm 37.402 in |
1,110 mm 43.701 in |
1,270 mm 50.000 in |
Current consumption | Emitter: 100 mA or less, Receiver: 160 mA or less |
Emitter: 115 mA or less, Receiver: 190 mA or less |
Emitter: 135 mA or less, Receiver: 230 mA or less |
||
PFHD | 4.8 × 10–9 | 5.2 × 10–9 | 6.0 × 10–9 | 6.8 × 10–9 | 7.6 × 10–9 |
MTTFD | 100 years or more | ||||
Net weight (Total of emitter and receiver) |
1,420 g approx. | 1,570 g approx. | 1,870 g approx. | 2,170 g approx. | 2,470 g approx. |
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. The model No.PFHD: Probability of dangerous failure per hour, MTTFD: Mean time to dangerous failure (in years)
Notes: 2) In the case of “When used as safety device for presses in China”, the distance between the center of the first beam axis and the center of the last beam
axis of the device becomes the protective height.
Type | Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch) |
||||
---|---|---|---|---|---|
Model No. (Note 2) | SF4B-H12-03 <V2> |
SF4B-H16-03 <V2> |
SF4B-H20-03 <V2> |
SF4B-H24-03 <V2> |
SF4B-H28-03 <V2> |
Number of beam channels | 12 | 16 | 20 | 24 | 28 |
Protective height (Note 2) |
230 mm 9.055 in |
310 mm 12.205 in |
390 mm 15.354 in |
470 mm 18.504 in |
550 mm 21.654 in |
Current consumption | Emitter: 70 mA or less, Receiver: 95 mA or less |
Emitter: 80 mA or less, Receiver: 115 mA or less |
|||
PFHD | 1.8 × 10–9 | 2.0 × 10–9 | 2.2 × 10–9 | 2.4 × 10–9 | 2.6 × 10–9 |
MTTFD | 100 years or more | ||||
Net weight (Total of emitter and receiver) |
510 g approx. | 660 g approx. | 810 g approx. | 960 g approx. | 1,100 g approx. |
Type | Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch) |
||||
---|---|---|---|---|---|
Model No. (Note 2) | SF4B-H32-03 <V2> |
SF4B-H36-03 <V2> |
SF4B-H40-03 <V2> |
SF4B-H48-03 <V2> |
SF4B-H56-03 <V2> |
Number of beam channels | 32 | 36 | 40 | 48 | 56 |
Protective height (Note 2) |
630 mm 24.803 in |
710 mm 27.953 in |
790 mm 31.102 in |
950 mm 37.402 in |
1,110 mm 43.701 in |
Current consumption | Emitter: 80 mA or less, Receiver: 115 mA or less |
Emitter: 90 mA or less, Receiver: 140 mA or less |
Emitter: 100 mA or less, Receiver: 160 mA or less |
||
PFHD | 2.8 × 10–9 | 3.0 × 10–9 | 3.2 × 10–9 | 3.6 × 10–9 | 4.0 × 10–9 |
MTTFD | 100 years or more | ||||
Net weight (Total of emitter and receiver) |
1,260 g approx. | 1,420 g approx. | 1,570 g approx. | 1,870 g approx. | 2,170 g approx. |
Type | Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch) |
||||
---|---|---|---|---|---|
Model No. (Note 2) | SF4B-H64-03 <V2> |
SF4B-H72-03 <V2> |
SF4B-H80-03 <V2> |
SF4B-H88-03 <V2> |
SF4B-H96-03 <V2> |
Number of beam channels | 64 | 72 | 80 | 88 | 96 |
Protective height (Note 2) |
1,270 mm 50.000 in |
1,430 mm 56.299 in |
1,590 mm 62.598 in |
1,750 mm 68.898 in |
1,910 mm 75.197 in |
Current consumption | Emitter: 100 mA or less, Receiver: 160 mA or less |
Emitter: 110 mA or less, Receiver: 180 mA or less |
Emitter: 120 mA or less, Receiver: 200 mA or less |
||
PFHD | 4.4 × 10–9 | 4.8 × 10–9 | 5.2 × 10–9 | 5.6 × 10–9 | 6.0 × 10–9 |
MTTFD | 100 years or more | ||||
Net weight (Total of emitter and receiver) |
2,470 g approx. | 2,770 g approx. | 3,070 g approx. | 3,370 g approx. | 3,670 g approx. |
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. The model No.
PFHD: Probability of dangerous failure per hour, MTTFD: Mean time to dangerous failure (in years)
Notes: 2) In the case of “When used as safety device for presses in China”, the distance between the center of the first beam axis and the center of the last beam
axis of the device becomes the protective height.
Type | Min. sensing object ø14 mm ø0.551 in type |
Min. sensing object ø25 mm ø0.984 in type |
|
---|---|---|---|
Model No. | SF4B-F□-03<V2> | SF4B-H□-03<V2> | |
Applicable standards (Note 2) |
International standard |
IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3) | |
Japan | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3) | ||
Europe (EU) | EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2 |
||
North America | ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06 |
||
CE marking directive compliance | Machinery Directive, EMC Directive, RoHS Directive | ||
Operating range (Note 3) | 0.3 to 7 m 0.984 to 22.966 ft | 12 to 64 beam channels type: 0.3 to 9 m 0.984 to 29.528 ft 72 to 96 beam channels type: 0.3 to 7 m 0.984 to 22.966 ft |
|
Min. sensing object (Note 4) |
ø14 mm ø0.551 in opaque object | ø25 mm ø0.984 in opaque object | |
Effective aperture angle | ±2.5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)] |
||
Supply voltage | 24 V DC ± 10 % Ripple P-P 10 % or less | ||
Control outputs (OSSD 1, OSSD 2) |
PNP open-collector transistor / NPN open-collector transistor (switching method) ・When selecting PNP output: Max. source current 200 mA, When selecting NPN output: Max. sink current 200 mA ・Applied voltage: same as supply voltage (When selecting PNP output: between the control output and +V, When selecting NPN output: between the control output and 0 V) ・Residual voltage: 2.5V or less (When selecting PNP output: source current 200 mA, when selecting NPN output: sink current 200 mA) (when using 20 m 65.617 ft length cable) |
||
Operation mode | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) (Note 5, 6) |
||
Protection circuit | Incorporated | ||
Response time | OFF response: 14 ms or less, ON response: 80 to 90 ms | ||
Auxiliary output (Non-safety output) |
PNP open-collector transistor / NPN open-collector transistor (switching method) ・When selecting PNP output: Max. source current 60 mA, When selecting NPN output: Max. sink current 60 mA ・Applied voltage: same as supply voltage (When selecting PNP output: between the auxiliary output and +V, When selecting NPN output: between the auxiliary output and 0 V) ・Residual voltage: 2.5V or less (When selecting PNP output: source current 60 mA, when selecting NPN output: sink current 60 mA) (when using 20 m 65.617 ft length cable) |
||
Operation mode | OFF when control outputs are ON, ON when control outputs are OFF. | ||
Protection circuit | Incorporated | ||
Responce time | OFF replay: 34 ms or less, ON replay 110 ms or less | ||
Interference prevention function | Incorporated (Note 7)(Available only when in series connection for SF4B-□-03 |
||
Emission halt function / Interlock function |
Incorporated / Incorporated [Manual reset / Auto reset (Note 8)] | ||
External device monitoring function | Incorporated | ||
Optional functions (Note 9) | Fixed blanking, floating blanking, auxiliary output switching, interlock setting changing, external relay monitor setting changing, muting setting changing, protecting, light emitting amount control | ||
Degree of protection | IP67 / IP65 (IEC) | ||
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ |
||
Ambient humidity | 30 to 85 % RH, Storage: 30 to 95 % RH | ||
Ambient illuminance | Incandescent light: 3,500 lx or less at the light-receiving face | ||
Dielectric strength voltage | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | ||
Shock resistance | 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each | ||
Emitting element | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil) | ||
Material | Enclosure: Aluminium, Upper and lower edges: Iron, Sensing surface: Polycarbonate and Polyester resin, Cap: PBT | ||
Connecting method / Cable length |
Connector / Total length up to 50 m 164.042 ft is possible for both emitter and receiver, with optional mating cables (Note 8) |
||
Accessories | MS-SFB-2 (Intermediate supporting bracket): (Note 9) SF4B-TR14 (Test rod): 1 No |
MS-SFB-2 (Intermediate supporting bracket): (Note 9) SF4B-TR25 (Test rod): 1 No |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 ℉.
2) PLe SIL3 compliant from production in August 2009.
3) The operating range is the possible setting distance between the emitter and the receiver.
4) When the floating blanking function is used, the size of the min. sensing object is changed.
5) The outputs are not "OFF" when muting function is active even if the beam channel is interruped.
6) In case the blanking function is valid, the operation mode is changed.
7) Please use 12-core cable.
8) The manual reset and auto reset are possible to be switched depending on the wiring status.
9) In case of using optional function, the handy-controller (SFB-HC) (optional) is required. However, a handy-controller cannot be used with the SF4B-□-01<V2>,SF4B-□-03<V2> and the SF-C14EX-01.
10) The cable can be extended within 30 m 98.425 ft (for emitter / receiver) when two safety light curtains are connected in series, within 20 m 65.617 ft when three safety light curtains are connected in series. Furthermore, when the muting lamp is used, the cable can be extended within 40 m 131.234 ft (for emitter / receiver).
11) The intermediate supporting bracket (MS-SFB-2) is enclosed with the following models. The number of sets required varies depending on the product.
[1 set]
SF4B-F□<V2>...79 to 111 beam channels
SF4B-H□<V2>...40 to 56 beam channels
SF4B-A□<V2>...20 to 28 beam channels
[2 sets]
SF4B-F127<V2>, SF4B-H□<V2>...64 to 80 beam channels
SF4B-A□<V2>...32 to 40 beam channels
[3 sets]
SF4B-H□<V2>...88 to 96 beam channels
SF4B-A□<V2>...44 to 48 beam channels
Refer to SF-C10 Specifications Pages for details of the specifications for the control unit SF-C11/C12/C13.
Model No. | SF-LAT-2N |
---|---|
Supply voltage | 3 V (LR6 battery x 2 pcs.) |
Battery | 1.5 V (LR6 battery) x 2 pcs. (replaceable)(Note 2) |
Battery lifetime | 30 hours approx. of continuous operation (LR6 battery, at +25 ℃ +77 ℉ ambient temperature) |
Light source | Red semiconductor laser: class 2 (IEC / JIS), Class II (FDA) (Max. output: 1 mW, Peak emission wavelength: 650 nm 0.026 mil)(Note 3) |
Spot diameter | 10 mm 0.394 in approx. (at 5 m 16.404 ft distance) |
Ambient temperature | 0 to +40 ℃ +32 to +104 ℉ (No dew condensation), Storage: 0 to +55 ℃ +32 to +131 ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Material | Enclosure: ABS, Mounting part: Aluminum |
Weight | Net weight: 150 g approx. (without batteries) |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|---|
2) | LR6 dry cell batteries are not provided with the product. Please purchase them separately. |
3) | This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
Model No. | RF-SFBH-□ |
---|---|
Attenuation rate of sensing range |
With one corner mirror: Declined to 90 %, With two corner mirrors: Declined to 80 % (When used in combination with the SF4B series) |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉ |
Ambient humidity | 30 to 85 % RH, Storage: 30 to 95 % RH |
Vibration resistance | 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
Shock resistance | 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each |
Material | Enclosure: Aluminum, Mounting bracket: Stainless steel, Mirror (rear surface mirror): Glass, Side cover: EPDM |
Accessories | Intermediate supporting bracket: 1 set (RF-SFBH-40/48/56/64), 2 sets (RF-SFBH-72/80/88/96) |
Note:
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)