【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Light Curtains / Safety Components > Optical Touch Switch SW-100 > Specifications

Optical Touch Switch SW-100

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Specifications

Specifications

Designation		Optical touch switch
Designation			With safeguard
Model No.		SW-101	SW-111
Sensing method		Thru-beam type photoelectric sensor (2 beam axes)
Applicable standards		CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)
Power supply		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		100 mA or less (excluding external connection load)
Outputs		Semiconductor Photo-MOS relay output x 3 • Maximum load current: 100 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 1.5 V or less (at 100 mA of load current)
	Output operation	Output 1 : When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3 : When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF
	Short-circuit protection	Incorporated
Response time		100 ms or less when an object is detected, 50 ms or less when an object is not detected
Time-out function		Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)
External input		0 to 1 V or 10 V to +V: Valid (External input indicator lights up), 4 to 6 V or Open: Invalid (External input indicator lights off)
Indicators	Power indicator (POWER)	Green LED (lights up when the power is ON)
	Operation indicator (OPE.)	Green LED (lights up when an object is detected)
	External input indicator 1	Green LED (lights up when external input 1 is valid)
	External input indicator 2	Orange LED (lights up when external input 2 is valid)
	Fault indicator (FAULT)	Yellow LED (blinks or lights up when fault occurs)
Protection		IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)
Ambient temperature		−25 to +50 ℃ −13 to +122 ℉ (No dew condensation or icing allowed), Storage: −30 to +70 ℃ −22 to +158 ℉
Ambient humidity		30 to 85 % RH, Storage: 30 to 85 % RH
Ambient illuminance		Incandescent light: 3,000 Lx or less at the light-receiving face
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance		500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each
Removable-type terminals	Connector	3.5 mm 0.138 in pitch, 2-level socket: 12 pins
Removable-type terminals	Terminal part	3.5 mm 0.138 in pitch spring-cage terminals: 6 pins x 2 (FMC1,5/6-ST-3,5GS manufactured by Phoenix Contact)
Cable		0.2 to 1.5 mm² [including single wire or ferrule (sleeve)]
Maximum cable length		Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm²), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm²)
Material		Enclosure: Polycarbonate, Polyester, O-ring: Silicone rubber, Mounting nut: PBT, Mounting packing: Silicone rubber
Weight		Net weight: 130 g approx., Gross weight: 200 g approx.	Net weight: 150 g approx., Gross weight: 220 g approx.