【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Static Control Devices > Static Control Devices > Thin-type Ionizer ER-VW > Specifications
|
Type | Spot type | |
---|---|---|
Model No. | ER-VW | |
Charge removal time (±1,000 V → ±100 V) |
1 sec. or less (Note 2) | |
Ion balance | ±10 V or less (Note 2) | |
Ozone generation | 0.05 ppm or less (Note 3) | |
Applicable fluid | Air (dried clean air) (Note 4) | |
Supplied air flow | 60 l/min. (ANR) or less | |
Air pressure range | 0.05 to 0.5 MPa | |
Supply voltage | 24 V DC ± 10 % | |
Current consumption | 120 mA or less | |
Discharge method | High frequency AC method | |
Discharge output voltage | 2,000 V approx. | |
Output Check (CHECK) Error (ERROR) Discharge (DSC)(Note 5) |
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 50 mA sink current) |
|
Output operation | Check output (CHECK): ON when the discharge needle is dirty or worn, OFF when operation is normal Error output (ERROR): OFF when abnormal discharge is detected, ON when operation is normal Discharge output (DSC)(Note 5): ON when discharging, OFF when discharge halts |
|
Short-circuit protection | Incorporated | |
Discharge halt input (DSC OFF) (Note 5) |
Short-circuit to 0 V: Discharge halt, Open: Discharge allowed (operation start) | |
Reset input (RESET) | In the state that operation is stopped due to an error detection, open 0 V of the power supply from short-circuit state to cancel ERROR | |
Indicators | Power (POWER) | Green LED (lights up when the power is ON) |
Discharge (DSC)(Note 5) | Green LED (lights up when discharging) | |
Air monitoring (AIR) (Note 6) | Orange LED (lights up when no air is being supplied) | |
Check (CHECK) | Orange LED (lights up when the discharge needle is dirty or worn, etc.) | |
Error (ERROR) | Red LED (lights up when abnormal discharge is detected) | |
Ambient temperature | 0 to +55 ℃ +32 to +131 ℉ (No dew condensation allowed), Storage: -10 to +65 ℃ +14 to +149 ℉ |
|
Ambient humidity | 35 to 65 % RH (No dew condensation allowed), Storage: 35 to 65 % RH | |
I/O connector | For power & input / output: 8-pin connector, For connection: 9-pin connector | |
Connectable units | Maximum number of connectable units: 5 (Including this unit) | |
Enclosure earthing | Capacitor earth | |
Material | Enclosure: ABS (Nickel plated), Nozzle mount, Screw mount, Nozzle: Stainless steel, Discharge needle: Tungsten | |
Weight | Net weight: 110 g approx., Gross weight: 180 g approx. | |
Accessories | Connector attached cable: 1 pc. (length 0.5 m 1.640 ft), End connector (9-pin): 1 pc., Lead wire for connecting F.G.: 1 pc. |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
2) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm 3.937 in from the front surface of the air flow outlet and a pressure of 0.25 MPa. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.)
3) A typical sample applied with a supply voltage of 24 V, a distance of 300 mm 11.811 in from the front surface of the air flow outlet and a pressure of 0.25 MPa.
4) Dried clean air is the air passing through air dryer (dew point –20 ℃ –4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.)
5) "DSC" is an abbreviated name of "DISCHARGE".
6) Discharge halts when lights up.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)