AUTOMATION
CONTROLS

Search
Discontinued
Products



AFPRP2Y04R | FP7 PHLS (Remote I/O) unit

  • Print This Page

FP7 PHLS (Remote I/O) unit

*Photo may vary from actual product.



  • Discontinued
  • Last time buySeptember 29, 2023
Product Number AFPRP2Y04R
Part Number AFPRP2Y04R
Product FP7 PHLS (Remote I/O) unit
Details PHLS Slave units
Product name FP7 PHLS (Remote I/O) unit
  • Substitute -
  • Sub Prod No. -
  • Sub Part No. -
  • Remark Sorry, no suggested alternative products.

Spec Detail As of September 29, 2023

Item Specifications
Product Number AFPRP2Y04R
Part Number AFPRP2Y04R

COMMUNICATION SPECIFICATIONS (Common)

Item Specifications
Communication method Two-wire system half duplex
Insulation method Pulse transformer insulation
Communication speed 6 Mbps / 12 Mbps
Synchronous method Bit synchronization
Error check CRC-12
Communication distance Total length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps)
(Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units.
Connection method Multi-drop method
Impedance 100 Ohm
Terminator Mounted on unit
External interface Connector-type terminal block

INPUT SIDE SPECIFICATIONS

Item Specifications
Insulation method Non-isolated
Rated input voltage 24 V DC
Rated input current 4.3 mA approx.
Input impedance 5.6 kOhm approx.
Min. ON voltage / Min. ON current 17 V / 2 mA
Max. OFF voltage / Max. OFF current 5 V / 0.5 mA
Response time:OFF→ON 1 ms or less
Response time:ON→OFF 1 ms or less

OUTPUT SIDE SPECIFICATIONS (Relay)

Item Specifications
Insulation method Relay insulation
Rated control capacity 1 A 250 V AC (2 A/common)
1 A 30 V DC (2 A/common)
Min. load 0.1 mA 100 mV (resistive load)
Response time:OFF→ON 10 ms or less
Response time:ON→OFF 5 ms or less
Life time:Mechanical life 2 x 10 7 operations or more
Life time:Electrical life 1 x 10 5 operations or more (switching frequency: 20 times/minute)
Surge absorber None
Short circuit protection None

COMMON GENERAL SPECIFICATIONS

Item Specifications
Ambient temperature 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

Item Specifications
Rated voltage range 20.4 to 28.8 V DC
Current consumption 85 mA or less
Net weight 75 g approx.

Return to top

Applicable Products As of September 29, 2023

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)