*Photo may vary from actual product.
|Product||Head-separated Dual display Digital Pressure Sensor [For gas & liquid]|
|Product name||Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100|
As of September 27, 2023
Specifications and design of the products are subject to change without notice for the product improvement.
|Applicable regulations||CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)|
|Type of pressure||Sealed gauge pressure
(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa.
|Rated pressure range||0 to +1 MPa|
|Pressure withstandability||2 MPa|
|Applicable fluid||Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7|
|Supply voltage||9 to 36 V DC
[9 to 32 V DC when using the attached connector (e-CON)]
|Current consumption||20 mA or less|
|Analog voltage output||Output voltage: 1 to 5 V DC (over rated pressure range)
Accuracy: ±1.0 % F.S. (at 23 ±2 ℃ +73.4 ±35 ℉)
±2.0 % F.S. (at -20 to 70 ℃ -4 to +158 ℉)
(including linearity, hysteresis and repeatability)
|Response time||1 ms or less|
|Ambient temperature||-20 to +70 ℃ -4 to +158 ℉ (No dew condensation or icing allowed),
Storage: -30 to +70℃ -22 to +158 ℉
|Ambient humidity||35 to 85 % RH, Storage : 35 to 85 % RH|
|Medium temperature range||-20 to +70 ℃ -4 to +158 ℉|
|Voltage withstandability||150 V AC for one min. between all supply terminals connected together and enclosure|
|Insulation resistance||100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure|
|Vibration resistance||10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each
(Note): The X, Y, and Z directions are defined as follows :
|Shock resistance||1,000 m/s2 acceleration in X, Y and Z directions three times each|
|Grounding method||Capacitor earth (Enclosure-supply terminal)|
|Pressure port||R1/4 male thread (throttle embeded)|
|Material||Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7)|
|Cable||0.2 mm2 3-core heat resistant cabtyre cable 2 m 3.562 ft long|
|Cable extension||Extension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable.|
|Weight||Net weight : 100 g approx., Gross weight : 150 g approx.|
|Accessories||Connector (e-CON) : 1 pc.|
|Remark||Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
The sensor head can be used independently.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)