Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Color Detection Fiber Sensor FZ-10 > Part Number > FZ-11P

FZ-11P | Color Detection Fiber Sensor FZ-10

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Dimensions
Accessories (Option)

Product Number	FZ-11P
Part Number	FZ-11P
Product	Color Detection Fiber Sensor
Details	Amplifier [PNP output]
Product name	Color Detection Fiber Sensor FZ-10

As of May 04, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item	Specifications
Product Number	FZ-11P
Part Number	FZ-11P
CE marking directive compliance	EMC Directive, RoHS Directive
Applicable fibers	FD-L51, FD-L52, FD-L53, FD-L54
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	45 mA or less
Sensing object	Opaque or translucent object larger than the spot diameter of the applicable fiber (Note) Make sure to confirm detection with an actual sensor before use.
Output	PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Output:Utilization category	DC-12 or DC-13
Output:Output operation	Switchable either Coincident-ON or Incoincident-ON
Output:Short-circuit protection	Incorporated
Response time	1 ms or less (3 ms or less when auto-teaching has been engaged)
Indicators	Power indicator: Green LED (lights up when the power is ON, blinks during auto-teaching) Operation indicator: Red LED (lights up when the output is ON) * Both blink alternately when a manual teaching error occurs Both blink simultaneously when the output is short-circuited
Timer function	Approx. 40 ms fixed OFF-delay timer (switchable either effective or ineffective)
Teaching	Button operation, Switchable either manual-teaching or auto-teaching
Tolerance	Adjustable in 16 grades with the tolerance adjuster
Ambient temperature	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed) (Note) , Storage: -20 to +70 ℃ -4 to +158 ℉ (Note) The amplifier should be used under the ambient temperature of +15 to +35 ℃ +59 to +95 ℉ when the tolerance adjuster is set from the 1st grade to the 4th grade, which provide fine color resolution.
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance	100 m/s² acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting element	Red LED / Green LED / Blue LED (Peak emission wavelength: 644 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil, modulated)
Material	Enclosure: ABS Case cover: Polycarbonate Fiber lock lever: PPS
Cable	0.2 mm² 3-core cabtyre cable, 2 m 328.084 ft long
Cable extension	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight	Net weight: 85 g approx.
Accessory	MS-DIN-3 (Amplifier mounting bracket): 1 pc. Adjusting screwdriver: 1 pc.