AUTOMATION
CONTROLS

Search
Discontinued
Products



SC-HG1-USB | Thru-beam Type Digital Displacement Sensor HG-T


Thru-beam Type Digital Displacement Sensor HG-T

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


Product Number SC-HG1-USB
Part Number SC-HG1-USB
Product Communication units for digital displacement sensors
Details USB communication unit
Product name Thru-beam Type Digital Displacement Sensor HG-T

As of April 19, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number SC-HG1-USB
Part Number SC-HG1-USB
Regulatory compliance EMC Directive (Note), RoHS Directive
(Note) : Applicable to products shipped in October 2019 and after.
Pollution degree 2
Operating altitude 2,000 m 6561.680 ft or less
(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Environmental resistance : Protection IP40 (IEC)
Environmental resistance : Ambient temperature -10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Environmental resistance : Insulation resistance 20 MΩ or more, with 250 V DC megger
Environmental resistance : Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2 (58 to 150 Hz) in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Material Enclosure: Polycarbonate
Net weight Net weight: 35 g approx., Gross weight: 95 g approx
Maximum number of connectable controllers Maximum of 15 controllers (one master, 14 slaves) per SC‑HG1‑USB unit
Supply voltage 24 V DC ±10 %, Ripple (P-P) 10 % or less
(Within specified power supply voltage range)
(Note) : Power is supplied from a connected controller / master unit.
Current consumption 50 mA or less
Compatible controllers HG-TC□
Communication method USB 2.0 Full Speed
(Note) : Dependent on PC environment.
Communication protocol Our dedicated protocol
USB port USB Mini-B (1 port)
USB 2.0 (Mini-B) cable for the connection of a PC is not provided with the product. Please purchase a USB 2.0 (Mini-B) cable.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)