Business > Industrial Devices > Automation Controls Top > IO-Link Communication Unit > SFD-WL3

SFD-WL3 | IO-Link Communication Unit

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number	SFD-WL3
Part Number	SFD-WL3
Product	IO-Link communication unit for safety light curtain SF4D series
Product name	IO-Link Communication Unit

As of December 09, 2023
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item	Specifications
Product Number	SFD-WL3
Part Number	SFD-WL3
Applicable regulations	CE Marking (EMC Directive, RoHS Directive)
Communication method : Safety light curtain communication side	RS-485 bidirectional communication (dedicated protocol)
Communication method : IO-Link communication side	IO-Link specifications: Ver. 1.1 Baud rate: COM3 (230.4 kbps) Data length: 18 bytes, process data (PD) Minimum cycle time: 1.5 ms
Supply voltage : Safety light curtain communication side	24V DC ⁺²⁰_-30 % Ripple P-P 10 % or less
Supply voltage : IO-Link communication side	24V DC ⁺²⁰_-25 % Ripple P-P 10 % or less
Current consumption : Safety light curtain communication side	15 mA or less
Current consumption : IO-Link communication side	30 mA or less
Functions	• IO-Link communication function • Safety light curtain setting data copy function (Note) Note : • The internal memory (nonvolatile) of this product has a service life. Settings cannot be configured more than 100,000 times. • This product cannot be used to directly enter settings from the IO-Link master unit to a safety light curtain using IO-Link communication. • The safety light curtain setting data copy function is designed only for use in maintenance / replace of safety light curtains.Use the copy function only for loading the setting data of the previous safety light curtain to a new unit. Loading the data to a device other than a newly installed safety light curtain may result in improper device operation. • This function cannot be used unless the product is connected with the IO-Link master unit and IO-Link communication is used.
Number of connectable units : This product	1 unit
Number of connectable units : Safety light curtains in series connection	Up to 5 units (total number of beam channels 256 or less)
Pollution degree	3
Excess voltage category	I
Operating altitude	2,000 m 6561.68 ft or less Note : Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m.
Degree of protection	IP64
Ambient temperature	-10 to +55℃ 14 to 131℉(No dew condensation or icing allowed), Storage: -25 to +60℃ -13 to 140℉
Ambient humidity	30 to 85% RH, Storage: 30 to 95% RH
Environmental resistance : Dielectric strength voltage	1,000 V AC for one minute, between all supply terminals connected together and enclosure
Environmental resistance : Insulation resistance	20 MΩ or more, with 500 V DC megger, between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance	10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions for two hours each Malfunction resistance 10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions twenty times each
Environmental resistance : Shock resistance	300 m/s² acceleration (30 G approx.) in X, Y, and Z directions three times each Malfunction resistance 100 m/s² acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each
Material	Main unit case: PA66 (with glass) Base plate: SPCC + Plating Product model nameplate: Polyester External connection connector: Brass + Plating
Connection : Safety light curtain communication side	8-core cable for safety light curtain (optional)
Connection method : IO-Link communication side	4-core cable with M12 connector (commercially available product)
Weight	270 g approx.
Remark	Use the safety light curtain monitoring information obtained via IO-Link only for diagnostic purposes. Do not use it for safety control purposes.