Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Light Curtains / Safety Components > Optical Touch Switch SW-100 > Part Number > SW-111

SW-111 | Optical Touch Switch SW-100

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Dimensions
Accessories (Option)

Product Number	SW-111
Part Number	SW-111
Product	Optical Touch Switch
Product name	Optical Touch Switch SW-100

As of May 06, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item	Specifications
Product Number	SW-111
Part Number	SW-111
Sensing method	Thru-beam type photoelectric sensor (2 beam axes)
Applicable standards	CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)
Power voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	100 mA or less (excluding external connection load)
Outputs	Semiconductor Photo-MOS relay output × 3 - Maximum load current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA of load current)
Output:Output operation	Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF
Output:Short-circuit protection	Incorporated
Response time	100 ms or less when an object is detected 50 ms or less when an object is not detected
Time-out function	Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)
External input	0 to 1 V or 10 V to +V: Valid (External input indicator lights up) 4 to 6 V or Open: Invalid (External input indicator lights off)
Indicators:Power indicator (POWER)	Green LED (lights up when the power is ON)
Indicators:Operation indicator (OPE.)	Green LED (lights up when an object is detected)
Indicators:External input indicator 1	Green LED (lights up when external input 1 is valid)
Indicators:External input indicator 2	Orange LED (lights up when external input 2 is valid)
Indicators:Fault indicator (FAULT)	Yellow LED (blinks or lights up when fault occurs)
Environmental resistance:Degree of protection	IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)
Environmental resistance:Ambient temperature	-25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Environmental resistance:Ambient humidity	30 to 85 % RH, Storage: 30 to 85 % RH
Ambient illuminance	Incandescent light: 3,000 Lx or less at the light-receiving face
Environmental resistance:Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance	20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance:Shock resistance	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each
Removable-type terminals:Connector	3.5 mm 0.138 in pitch, 2-level socket: 12 pins
Removable-type terminals:Terminal part	3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact)
Maximum cable length	Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm² ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm² )
Material	Enclosure: Polycarbonate, Polyester O-ring: Silicone rubber Mounting nut: PBT Mounting packing: Silicone rubber
Weight	Net weight: 150 g approx. Gross weight: 220 g approx.