【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



Contact-Type Digital Displacement Sensor HG-S

Order guide

Sensor heads (Air-Driven Type)

Type Appearance Resolution Measurement
range
Model No.
10 mm
0.394 in
type
(Note 1)
General
purpose
10mm type General purpose 0.5μm
0.02 mil
10mm
0.394 in
(Note 2)
HG-S1010-AC
High
precision
10mm type High precision 0.1μm
0.004 mil
HG-S1110-AC

Notes :

1) Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019.
2) The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm 0.004 in or more.

Sensor heads (Regular Type)

Type Appearance
(Note 1)
Resolution Measurement
range
Model No.
10 mm
0.394 in
type
General
purpose
Standard 10mm type General purpose 0.5μm
0.02 mil
10mm
0.394 in
HG-S1010
Low
measuring
force
(Note 2)
HG-S1010R
High
precision
Standard 10mm type High precision 0.1μm
0.004 mil
HG-S1110
Low
measuring
force
(Note 2)
HG-S1110R
32 mm
1.260 in
type
General
purpose
Standard 32mm type General purpose 0.5μm
0.02 mil
32mm
1.260 in
HG-S1032
50 mm
1.969 in
type
General
purpose
Standard 50mm type General purpose 0.5μm
0.02 mil
50mm
1.969 in
HG-S1050
(Note 3)

Notes:

1) The image shows the standard type only.
2) The low measuring force type does not have a rubber bellow.
3) Always connect the 50 mm 1.969 in type (HG-S1050) to an HG-SC□ controller manufactured February 2019 or later.

Sensor head connection cables (bending-resistant type)

Designation Appearance Length Model No.
Straight
connector
Straight connector 3 m
9.843 ft
CN-HS-C3
7 m
22.966 ft
CN-HS-C7
10 m
32.808 ft
CN-HS-C10
20 m
65.617 ft
CN-HS-C20
L-shaped
connector
(Note 1)
L-shaped connector 3 m
9.843 ft
CN-HS-C3L
7 m
22.966 ft
CN-HS-C7L
10 m
32.808 ft
CN-HS-C10L
20 m
65.617 ft
CN-HS-C20L

Note 1: Not compatible with air-driven type sensor heads (HG-S1010-AC / HG-S1110-AC).

Controllers

Up to 15 slave units can be connected per master unit.

Type Appearance Output Number of connectable controllers Model No.
Master unit High performance type
(analog current +
input / output)
Master unit High performance type NPN output Up to 15 slave units can be connected per master unit.
(Note)
HG-SC101
PNP output HG-SC101-P
Slave units High performance type
(analog current +
input / output)
Slave units High performance type, Standard type NPN output HG-SC111
PNP output HG-SC111-P
Standard type
(input / output)
NPN output HG-SC112
PNP output HG-SC112-P
Wire-saving type Slave units Wire-saving type - HG-SC113

Note: When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit

Communication units for digital displacement sensors

End plates

End plates are required for connection of controllers.

MS-DIN-E
[2 pcs. per set]

MS-DIN-E

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region




Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)