SC

Partly Order Discontinued
SC-T8J, SC-T8J-P, SC-TP8J

	September 30, 2015
	SC-E81, SC-E82

Circuit/ Wiring

I/O Circuit and Wiring diagrams

Main unit Separate unit

Pin layout diagram for MIL connector pins

*	The MIL connector pin layout is compatible with SL-BMW sensor block, which is utilized to simplify wiring and save space.
*	+V (pin No.10 and 20) and 0 V (pin No. 9 and 19) are connected inside the block.

Connector input extension unit
For NPN output devices

Snap male connector pin position

Notes: 1)	For DC 2-wire type input device Conditions • Leak current : 1 mA or less (when the power is OFF) • Offset voltage : 3 V or less (when the power is ON) • The product of which the load current range contains 5 to 8 mA.
2)	Residual voltage: 1 V or less (at 50 mA sink current)

Connector input extension unit
For PNP output devices

Snap male connector pin position

Notes: 1)	For DC 2-wire type input device Conditions • Leak current : 1 mA or less (when the power is OFF) • Offset voltage : 3 V or less (when the power is ON) • The product of which the load current range contains 5 to 8 mA.
2)	Residual voltage: 1 V or less (at 50 mA sink current)

e-CON 1-channel connector input extension unit
e-CON 8-channel connector input extension unit

Notes: 1)	Only SC-E1 can be used. For DC 2-wire type input device (24 V DC only) • Leak current : 1 mA or less (when the power is OFF) • Offset voltage : 3 V or less (when the power is ON) • The product of which the load current range contains 5 to 8 mA.
2)	Residual voltage: 1 V or less (at 50 mA sink current)

e-CON 8-channel connector input extension unit
(Without an input signal indicator)

Notes: 1)	It depends on the power supply from SC-MIL or SC-GU3-0□.
2)	When using a DC 2-wire input device, connect a device recommended load to the outside.