AUTOMATION
CONTROLS

Search
Discontinued
Products



SC

Order guide

Designation Appearance Model No. Description
Main unit
(Note1)
SC-MIL The MIL connector allows up to 16 input / output device connections to a PLC or custom circuit board, in a single step.
Separate unit
(Note1)
SC-MIL-S Distributed installations are possible through the use of a main unit and MIL connectors.
1-channel
connector
input extension
unit
SC-T1J For NPN output devices Allows the connection of input device, such as sensor or switch.
Incorporates a power indicator and an input signal indicator (1 ch).
SC-T1J-P For PNP output devices
e-CON
1-channel
connector input
extension unit
SC-E1 This extension unit can be connected to commercially available devices including an NPN output type or DC 2-wire type sensor. Includes power and input signal indicators (for one channel).
When using in combination with the SC-GU3 series, use with the SC-71.
e-CON
8-channel
connector input
extension unit
SC-E81 This extension unit can be connected to eight NPN output type devices. Includes power and input signal indicators (for eight channels).
e-CON
8-channel
connector input
extension unit
(Without an input
signal indicator)
SC-E82 This extension unit can be connected to eight commercially available devices and output devices including an NPN/PNP output type sensors, switches or DC 2-wire sensors.
Includes a power indicator. Does not include an input signal indicator.
Non-line
connector
CN-70 This one-touch connector is used to connect the main unit to the following devices:
The FX-501/502/301/305/311 and FX-411/412 fiber sensor, the LS-401/403 laser sensor, digital pressure sensor DPS-401/402, the GA-311 compact inductive proximity sensor, the FX-CH(-P) bank selection unit and the SC-T1J(-P) 1-channel connector input extension unit. (Note 2, 3)
End plates MS-DIN-E
2 pcs. per set
After the SC series units have been attached to the DIN rail, all these devices must be secured firmly together by placing end plates at each of the ends and sandwiching the devices in between. Ensure that these end plates are used for this purpose.

Notes:

1) Conditions of connectable DC 2-wire type input device
• Leak current: 1 mA or less (when the power is OFF), Offset voltage: 3 V or less (when the power is ON)
• Product whose load current range includes 5 to 8 mA
2) The non-line connector now can be used with 4-pin types, such as the FX-305 and LS-401, since its production run starting in August 2004.
3) The 2-output type can output the output 1 (OUT 1) only from SC-MIL. There is no connection for output 2 (OUT2).

Discontinued products

* Substitute products will not guarantee the specifications of discontinued products.
Please check the specification details from catalog before use.

Discontinued product Recommended substitute
Product number Part number Last time buy   Product number Series Remark
SC-T8J SC-T8J September 30, 2015
To be discontinued
SC-E81 Commnunication Unit for Open Network SC-GU3 If it is connected to SC-MIL/SC-MIL-S, the compatible installation tool for SC is needed.
SC-T8J-P SC-T8J-P September 30, 2015
To be discontinued
SC-E82 Commnunication Unit for Open Network SC-GU3 If it is connected to SC-MIL/SC-MIL-S, the compatible installation tool for SC is needed.
SC-TP8J SC-TP8J September 30, 2015
To be discontinued
SC-E82 Commnunication Unit for Open Network SC-GU3 If it is connected to SC-MIL/SC-MIL-S, the compatible installation tool for SC is needed.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)