|Type||Snap action / Push-on type SPST|
|Electrical||Rating||10 μA 2 V DC to 20 mA 15 V DC (Resistive load)|
|Contact Resistance||Max. 100 mΩ|
|Insulation Resistance||Min. 100 MΩ (at 100 V DC)|
|Dielectric Withstanding Voltage||250 V AC for 1 minute|
|Bouncing||Max. 10 ms (ON, OFF)|
|Mechanical||Operating Force||1.6 N|
|Endurance||Operating Life||Min. 500,000 cycles|
|Operating Temperature||–40°C to +85°C|
|Storage Temperature||–40°C to +90°C (Bulk)
–20°C to +60°C (Taping)
|Minimum Quantity / Packing Unit||5,000 pcs. Embossed Taping (Reel Pack)|
|Quantity / Carton||25,000 pcs.|
Note: Non washable
|(*1) IP67 :||Switch shall not be operated during test.
Water or dust ingress shall be limited enough to prevent deleterious effect to the switch function.
However, IP67 shall be guaranteed under single product state, then there is a possibility that IP67 performance become impaired depending on your mounting condition or usage.
So, please ask us in advance, if the switch is applied to important usage for water and dust resistant.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)