【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Pressure Sensors / Flow Sensors > Pressure Sensors / Flow Sensors > Dual Display Digital Pressure Sensor [For Gas] DP-100L > Specifications
|
Type | Discrete wire type | M12 connector type | |||
---|---|---|---|---|---|
For low pressure | For high pressure | For low pressure | For high pressure | ||
Model No. | DP-101ZL3-M-P | DP-102ZL3-M-P | DP-101ZL3-M-P-C | DP-102ZL3-M-P-C | |
Regulatory compliance and certification | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification Type of | ||||
Type of pressure | Gauge pressure | ||||
Rated pressure range | -100.0~+100.0kPa | -0.100~+1.000MPa | -100.0~+100.0kPa | -0.100~+1.000MPa | |
Set pressure range | -101.0~+101.0kPa | -0.101~+1.010MPa | -101.0~+101.0kPa | -0.101~+1.010MPa | |
Pressure withstandability | 500kPa | 1.5MPa | 500kPa | 1.5MPa | |
Applicable fluid | Non-corrosive gas | ||||
Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | ||||
Power consumption (Note 2) | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage) 360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage) |
||||
Communication output (C/Q) (Note 3) |
IO-Link communication |
IO-Link Specification V1.1 | |||
Baud rate | COM3(230.4kbps) | ||||
Process data | 4byte | ||||
Minimum cycle time |
1.0ms | ||||
Control output (DO) | PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 50 mA source current) |
||||
Output operation | NO/NC (selectable by key operation) | ||||
Output modes | EASY mode / Hysteresis mode / Window comparator mode | ||||
Hysteresis | Minimum 1 digit (variable) | ||||
Repeatability | ±0.1%F.S.(within ±2 digits) | ±0.2%F.S.(within ±2 digits) | ±0.1%F.S(within ±2 digits) | ±0.2%F.S.(within ±2 digits) | |
Response time | 2.5ms、5ms、10ms、25ms、50ms、100ms、250ms、500ms、1,000ms、5,000ms selectable by key operation | ||||
Short-circuit protection | Incorporated | ||||
Display | 4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) | ||||
Displayable pressure range | -101.0~+101.0kPa | -0.101~+1.010MPa | -101.0~+101.0kPa | -0.101~+1.010MPa | |
Output indicator | Orange LED (Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON during non-IO-Link communication (synchronized with the output operation indicator 2) Output operation indicator 2: Lights up when the control output is ON) |
||||
Environmental resistance | Protection | IP40(IEC) | |||
Ambient temperature | −10 to +50℃ +14 to +122 ℉(No dew condensation or icing allowed), Storage: −10 to +60℃ +14 to +140 ℉ | ||||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||
Insulation resistance | 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure | ||||
Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each (when panel or flat attachment is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each) |
||||
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each | ||||
Temperature characteristics | Within ±0.5 % F.S. (at +20℃ +68 ℉) |
Within ±1 % F.S. (at +20℃ +68 ℉) |
Within ±0.5 % F.S. (at +20℃ +68 ℉) |
Within ±1 % F.S. (at +20℃ +68 ℉) |
|
Pressure port | M5 female thread | ||||
Material | Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber |
||||
Connecting method | Connector | ||||
Cable length | Total length up to 20 m 65.617 ft (Condition of CE compliance less than 20 m 65.617 ft) is possible with 0.3 mm2, or more, cable. | ||||
Weight | Net weight: 30 g approx., Gross weight: 125 g approx. | Net weight: 30 g approx., Gross weight: 95 g approx. | |||
Accessories | CN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1 pc. | Dedicated M12 connector cable, 0.3 m 0.984 ft long: 1 pc. |
Notes: 1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉. |
---|---|
2) | The power consumption does not include the output load current. |
3) | When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)