【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > SC > I/O Circuit and Wiring diagrams

SC

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Partly Order Discontinued
SC-T8J, SC-T8J-P, SC-TP8J

	September 30, 2015
	SC-E81, SC-E82

Circuit/ Wiring

I/O Circuit and Wiring diagrams

SC-MIL SC-MIL-S

Main unit Separate unit

Pin layout diagram for MIL connector pins

*	The MIL connector pin layout is compatible with SL-BMW sensor block, which is utilized to simplify wiring and save space.
*	+V (pin No.10 and 20) and 0 V (pin No. 9 and 19) are connected inside the block.

SC-T1J

Connector input extension unit
For NPN output devices

Snap male connector pin position

Pin No.	SC-T1J
1	+V
2	GND
3	Input 1
4	Input 2(Note 1)

Notes: 1)	For DC 2-wire type input device Conditions • Leak current : 1 mA or less (when the power is OFF) • Offset voltage : 3 V or less (when the power is ON) • The product of which the load current range contains 5 to 8 mA.
2)	Residual voltage: 1 V or less (at 50 mA sink current)

SC-T1J-P

Connector input extension unit
For PNP output devices

Snap male connector pin position

Pin No.	SC-T1J-P
1	+V
2	GND
3	Input 1
4	Input 2(Note 1)

Notes: 1)	For DC 2-wire type input device Conditions • Leak current : 1 mA or less (when the power is OFF) • Offset voltage : 3 V or less (when the power is ON) • The product of which the load current range contains 5 to 8 mA.
2)	Residual voltage: 1 V or less (at 50 mA sink current)

SC-E1 SC-E81

e-CON 1-channel connector input extension unit
e-CON 8-channel connector input extension unit

Notes: 1)	Only SC-E1 can be used. For DC 2-wire type input device (24 V DC only) • Leak current : 1 mA or less (when the power is OFF) • Offset voltage : 3 V or less (when the power is ON) • The product of which the load current range contains 5 to 8 mA.
2)	Residual voltage: 1 V or less (at 50 mA sink current)

SC-E82

e-CON 8-channel connector input extension unit
(Without an input signal indicator)

Notes: 1)	It depends on the power supply from SC-MIL or SC-GU3-0□.
2)	When using a DC 2-wire input device, connect a device recommended load to the outside.