AUTOMATION
CONTROLS

Search
Discontinued
Products



Digital Laser Sensor LS-400

Option

Designation Model No. Description
Sensor head
mounting
bracket
MS-CX-1 Foot angled mounting bracket
MS-CX-2 Foot biangled mounting bracket
Flat mounting possible to avoid obstructions caused by the height of the sensor.
MS-CX-3 Back angled mounting bracket
MS-CX-4 Protective mounting bracket
Protects sensors preventing beam axis displacement due to shocks.
Sensor mounting
bracket for beam
axis alignment
MS-CX-11 Mounting bracket that makes fine beam axis alignment possible after setting the sensor head.
Adjustment angle: up and down, right and left: 4 degrees
Mounting directions: two directions, vertical and horizontal
Universal sensor
mounting stand
(Note 1)
MS-AJ1 Horizontal mounting type Basic assembly
MS-AJ2 Vertical mounting type
MS-AJ1-A Horizontal mounting type Lateral arm assembly
MS-AJ2-A Vertical mounting type
Amplifier mounting bracket MS-DIN-2 Mounting bracket for amplifier
Reflector mounting bracket MS-RF23 Mounting bracket for RF-230
Amplifier
protection seal
FX-MB1 10 sets of 2 communication window seals and 1 connector seal
Communication window seal:
It prevents malfunction due to transmission signal from another amplifier, as well as, prevents effect on another amplifier.
Connector seal:
It prevents contact of any metal, etc., with the pins of the quick-connection cable.
Reflector RF-310 For coaxial retroreflective type Compact reflector Sensing range (U-LG mode)
・LS-H91(F):
0.1 to 7 m
0.328 to 22.966 ft
・LS-H91(F)-A:
0.1 to 5 m
0.328 to 16.404 ft
Reflective tape RF-33 For coaxial retroreflective type
Size:
25.2 x 27.8 x t 0.4 mm
25.2 x 27.8 x t 0.4 mm
RF-31 For coaxial retroreflective type
Size:
9.2 x 9.2 x t0.4mm
0.362 x 0.362 x t 0.016 in
Bank
selection unit
(Note 2)
FX-CH NPN input type Setting for up to 16 laser sensors can be changed at once by means of external signals.
FX-CH-P PNP input type
Note 1 :Refer to the universal sensor mounting stand MS-AJ for details.
Note 2 :Refer to the bank selection unit FX-CH for details.

Sensor head mounting bracket

MS-CX-1

MS-CX-1
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX-2

MS-CX-2
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX-3

MS-CX-3
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX-4

MS-CX-4
Two M3 (length 12 mm 0.472 in) screws with washers are attached.

Sensor mounting bracket for beam axis alignment

MS-CX-11

MS-CX-11
Two M3 (length 14 mm 0.551 in) screws with washers are attached.

Amplifier mounting bracket

MS-DIN-2

MS-DIN-2

Reflector mounting bracket

MS-RF23

MS-RF23
Two M4 (length 10 mm 0.394 in) screws with washers are attached.

Amplifier protection seal

FX-MB1

FX-MB1

Universal sensor mounting stand

MS-AJ1

MS-AJ1

MS-AJ1-A

MS-AJ1-A
With the lateral arm, the sensor can sense from above a production line.

MS-AJ2

MS-AJ2

MS-AJ2-A

MS-AJ2-A
With the lateral arm, the sensor can sense from above a production line.

Bank selection unit

FX-CH(-P)

FX-CH(-P)

Reflector

RF-310

RF-310

Reflective tape

RF-33

RF-33

RF-31

RF-31

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)