Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Digital Laser Sensor LS-400 > Specifications
|
Type | Coaxial retroreflective | |||
---|---|---|---|---|
Class 2 | Class 1 | |||
Model No. | IEC / JIS / GB standards conforming type |
LS-H92 | LS-H91 | LS-H91-A |
FDA (Note 2) / IEC / JIS standards conforming type | LS-H92F | LS-H91F | LS-H91F-A | |
CE marking directive compliance | EMC Directive, RoHS Directive | |||
Applicable amplifiers | LS-401(P), LS-401(P)-C2, LS-403 | |||
Sensing range | U-LG mode | 0.2 to 30 m 0.656 to 98.425 ft (Note 4) |
0.1 to 7 m 0.328 to 22.966 ft (Note 4) |
0.1 to 5 m 0.328 to 16.404 ft (Note 4) |
STD mode | 0.2 to 20 m 0.656 to 65.617 ft (Note 4) |
0.1 to 5 m 0.328 to 16.404 ft (Note 4) |
0.1 to 3 m 0.328 to 9.843 ft (Note 4) |
|
FAST mode | 0.2 to 10 m 0.656 to 32.808 ft (Note 4) |
0.1 to 3 m 0.328 to 9.843 ft (Note 4) |
0.1 to 1 m 0.328 to 3.281 ft (Note 4) |
|
H-SP mode | ||||
Operation indicator | Orange LED (lights up when the amplifier output is ON) | |||
Laser emission indicator | Green LED (lights up during laser emission) | |||
Spot-shape adjuster | - | |||
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
|||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each | |||
Emitting element | IEC / JIS / GB standards conforming type |
Red semiconductor laser, Class 2 (IEC / JIS / GB) (Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil) |
Red semiconductor laser, Class 1 (IEC / JIS / GB) (Max. output: 1 mW Peak emission wavelength: 655 nm 0.026 mil) |
|
FDA (Note 2) / IEC / JIS standards conforming type |
Red semiconductor laser, Class 2 (FDA / IEC / JIS) (Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil) |
Red semiconductor laser, Class 1 (FDA / IEC / JIS) (Max. output: 1 mW Peak emission wavelength: 655 nm 0.026 mil) |
||
Material | Enclosure: PBT (Mounting part: PEI), Lens cover: Acrylic | |||
Cable | 0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplifier attached) (Note 5) | |||
Weight | Net weight: 30 g approx. Gross weight: 40 g approx. |
Net weight: 30 g approx. Gross weight: 45 g approx. |
||
Accessories | RF-230(Reflector): 1 pc. Warning label: 1 set (Labels are written in Japanese, English and Chinese for compliance with various standards.) |
RF-330(Reflector): 1 pc. Warning label: 1 set (Labels are written in Japanese, English and Chinese for compliance with various standards.) |
RF-330(Reflector): 1 pc. Explanation label: 1 set (Labels are written in Japanese and Chinese for compliance with various standards.) |
Type | Diffuse reflective | |||
---|---|---|---|---|
Long sensing range spot reflective | Long sensing range line reflective |
|||
Class 2 | Class 1 | |||
Model No. | IEC / JIS / GB standards conforming type |
LS-H21 | LS-H21-A | LS-H22 (Note 3) |
FDA (Note 2) / IEC / JIS standards conforming type | LS-H21F | LS-H21F-A | LS-H22F (Note 3) | |
CE marking directive compliance | EMC Directive, RoHS Directive | |||
Applicable amplifiers | LS-401(P), LS-401(P)-C2, LS-403 | |||
Sensing range | U-LG mode | 30 to 1,000 mm 1.181 to 39.370 in |
30 to 500 mm 1.181 to 19.685 in |
30 to 1,000 mm 1.181 to 39.370 in |
STD mode | 30 to 500 mm 1.181 to 19.685 in |
30 to 250 mm 1.181 to 9.843 in |
30 to 500 mm 1.181 to 19.685 in |
|
FAST mode | 30 to 300 mm 1.181 to 11.811 in |
30 to 150 mm 1.181 to 5.906 in |
30 to 300 mm 1.181 to 11.811 in |
|
H-SP mode | ||||
Operation indicator | Orange LED (lights up when the amplifier output is ON) | |||
Laser emission indicator | Green LED (lights up during laser emission) | |||
Spot-shape adjuster | Multi-turn adjuster | |||
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
|||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each | |||
Emitting element | IEC / JIS / GB standards conforming type |
Red semiconductor laser, Class 2 (IEC / JIS / GB) (Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil) |
Red semiconductor laser, Class 1 (IEC / JIS / GB) (Max. output: 1 mW Peak emission wavelength: 655 nm 0.026 mil) |
Red semiconductor laser, Class 2 (IEC / JIS / GB) (Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil) |
FDA (Note 2) / IEC / JIS standards conforming type |
Red semiconductor laser, Class 2 (FDA / IEC / JIS) (Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil) |
Red semiconductor laser, Class 1 (FDA / IEC / JIS) (Max. output: 1 mW Peak emission wavelength: 655 nm 0.026 mil) |
Red semiconductor laser, Class 2 (FDA / IEC / JIS) (Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil) |
|
Material | Enclosure: PBT (Mounting part: PEI), Lens cover: Acrylic | |||
Cable | 0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplifier attached) (Note 5) |
|||
Weight | Net weight: 30 g approx. Gross weight: 40 g approx. |
Net weight: 35 g approx. Gross weight: 45 g approx. |
||
Accessories | Warning label: 1 set (Labels are written in Japanese, English and Chinese for compliance with various standards.) |
Explanation label: 1 set (Labels are written in Japanese and Chinese for compliance with various standards.) |
LS-MR1 Lens attachment for line reflective : 1 pc. Warning label: 1 set (Labels are written in Japanese, English and Chinese for compliance) |
Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
Note 2 : | This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50. |
Note 3 : | LS-H22(F) is the set model No. for LS-H21(F) long sensing range spot reflective type sensor head combined with the LS-MR1 lens attachment for line reflective type. Hence, LS-H21(F) appears on the sensor head itself. |
Note 4 : | The sensing range is the value for the RF-330 [RF-230 for the LS-H92(F)] reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft [LS-H92(F): 0.2 m 0.656 ft] away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity. |
Note 5 : | Cable cannot be extended. |
Type | Connector type | Cable type | ||
---|---|---|---|---|
with communication function | ||||
Model No. | NPN output | LS-401 | LS-403 | LS-401-C2 |
PNP output | LS-401P | - | LS-401P-C2 | |
CE marking directive compliance | EMC Directive, RoHS Directive | |||
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||
Power consumption | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage) ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
|||
Outputs (Output 1, Output 2) |
<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA (LS-403 is 50 mA) (Note 2) ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less [at 100 mA (LS-403 is 50 mA) (Note 2) sink current] <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA (Note 2) ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less [at 100 mA (Note 2) source current] |
|||
Output operation | Selectable either Light-ON or Dark-ON, with jog switch | |||
Short-circuit protection | Incorporated | |||
Response time | 80 μs or less (H-SP), 150 μs or less (FAST), 500 μs or less (STD), 4 ms or less (U-LG) selectable with jog switch | |||
External input (Laser emission halt Full-auto teaching / Limit teaching) |
- | <NPN output type> NPN non-contact input ・Signal condition High: +5 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less) ・Input impedance: 10 kΩ approx. <PNP output type> PNP non-contact input ・Signal condition High: +4 V to +V DC (sink current 3 mA or less) Low: 0 to +0.6 V DC or open ・Input impedance: 10 kΩ approx. |
||
Operation indicator | Orange LED (lights up when output 1 and output 2 are ON) | |||
Laser emission indicator | Green LED (lights up during laser emission) | |||
Select indicator | Yellow LED (lights up when either output 1 or output 2 is selected) |
|||
MODE indicator | RUN: Green LED, TEACH ・ L/D ・ TIMER ・ CUST ・ PRO: Yellow LED | |||
Digital display | 4 digit (green) + 4 digit (red) LED display | |||
Sensitivity setting | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment Differential mode: 5-level settings (LS-403 has 8-level settings) |
|||
Fine sensitivity adjustment function | Incorporated | |||
Timer function | Incorporated with variable ON-delay / OFF-delay / One shot timer, switchable either effective or ineffective. [Timer period: 1 to 9,999 ms approx.(LS-403 is 0.5 to 9,999 ms approx.)] | |||
Automatic interference prevention function | Incorporated [Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode) (LS-403 is up to two sets when in H-SP mode)] |
|||
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed), Storage: -20 to +70 ℃ 4 to +158 ℉ |
|||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
|||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each | |||
Material | Enclosure: Heat-resistant ABS, Transparent cover: Polycarbonate, Push button switch: Acrylic, Jog switch: ABS |
|||
Cable | - (Note 3) | 0.15 mm2 5-core cabtyre cable, 2 m 6.562 ft long | ||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |||
Weight | Net weight: 15 g approx., Gross weight: 20 g approx. |
Net weight: 65 g approx., Gross weight: 75 g approx. |
Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
Note 2 : | In case of LS-401(P), 50 mA if 5 to 8 amplifiers are connected in cascade, and 25 mA if 9 to 16 amplifiers are connected in cascade. |
Note 3 : | In case of LS-403, 25 mA if 5 to 16 amplifiers are connected in cascade. |
Note 4 : | The cable is not supplied as an accessory for connector type. Be sure to purchase the optional quick-connection cables given below. When connecting to SC-GU3 series, be sure to purchase the optional cascading connector unit. Main cable (4-core): CN-74-C1 (cable length 1 m 3.281 ft), CN-74-C2 (cable length 2 m 6.562 ft), CN-74-C5 (cable length 5 m 16.404 ft) Sub cable (2-core): CN-72-C1 (cable length 1 m 3.281 ft), CN-72-C2 (cable length 2 m 6.562 ft), CN-72-C5 (cable length 5 m 16.404 ft) Cascading connector unit: SC-71 |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)