Business > Industrial Devices > Automation Controls Top > Components & Devices > Relays / Couplers > PhotoMOS > PhotoMOS Lineup > PhotoMOS GU 1 Form A Short Circuit Protection > Rating/Performance
|
Item | Symbol | AQV112KL(A) | Remarks | |
---|---|---|---|---|
Input | LED forward current | IF | 50mA | |
LED reverse voltage | VR | 5V | ||
Peak forward current | IFP | 1A | f=100Hz, Duty Ratio=0.1% |
|
Power dissipation | Pin | 75mW | ||
Output | Load voltage (DC) | VL | 7 to 60V | |
Continuous load current (DC) | IL | 0.5A | ||
Power dissipation | Pout | 500mW | ||
Total power dissipation | PT | 550mW | ||
I/O isolation voltage | Viso | 1,500Vrms | ||
Ambient temperature (Operating) | Topr | -40 to +85°C | (Avoid icing and condensation) | |
Ambient temperature (Storage) | Tstg | -40 to +100°C | ||
Junction temperature | Tj | 125°C |
Item | Symbol | AQV112KL(A) | Condition | ||
---|---|---|---|---|---|
Input | LED operate current | Typical | IFon | 0.8mA | IL=100mA |
Maximum | 10mA | ||||
LED turn off current | Minimum | IFoff | 0.3mA | ||
Typical | 0.7mA | ||||
LED dropout voltage | Typical | VF | 1.35V (1.17V at IF=10mA) | IF=50mA | |
Maximum | 1.5V | ||||
Output | On resistance | Typical | Ron | 0.55Ω | IF=10mA IL=Max. Within 1s |
Maximum | 2.0Ω | ||||
Load short circuit detection voltage*1 | Typical | VLSHT | 5V | IF=10mA | |
Maximum | 7V | ||||
Off state leakage current | Maximum | ILeak | 1μA | IF=0mA VL=Max. |
|
Transfer characteristics | Turn on time*2 | Typical | Ton | 2.0ms | IF=10mA IL=100mA VL=10V |
Maximum | 5.0ms | ||||
Turn off time*2 | Typical | Toff | 0.1ms | ||
Maximum | 1.0ms | ||||
I/O capacitance | Typical | Ciso | 0.8pF | f=1MHz VB=0V |
|
Maximum | 1.5pF | ||||
Initial I/O isolation resistance | Minimum | Riso | 1,000MΩ | 500V DC |
*1. | At IF=10mA, load current will be oscillated if the voltage between 4 (+) -6 (-) terminals becomes more than the delection voltage of the short circuit. |
*2. | Turn on/Turn off time |
|
Please use under recommended operating conditions to obtain expected characteristics.
Item | Symbol | Min. | Max. | Unit | |
---|---|---|---|---|---|
LED current | IF | 10 | 30 | mA | |
AQV112KL(A) | Load voltage (DC) | VL | 10 | 48 | V |
Continuous load current (DC) | IL | - | 0.5 | A |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)