Business > Industrial Devices > Automation Controls Top > Components & Devices > Relays / Couplers > PhotoMOS > PhotoMOS Lineup > PhotoMOS GU SOP 2 Form B > Rating/Performance
|
Item | Symbol | AQW414S | Remarks | |
---|---|---|---|---|
Input | LED forward current | IF | 50mA | |
LED reverse voltage | VR | 5V | ||
Peak forward current | IFP | 1A | f=100Hz, Duty Ratio=0.1% | |
Power dissipation | Pin | 75mW | ||
Output | Load voltage (peak AC) | VL | 400V | |
Continuous load current | IL | 0.08A(0.1A) | Peak AC, DC ( ): in case of using only 1 channel |
|
Peak load current | Ipeak | 0.24A | 100ms (1 shot), VL=DC | |
Power dissipation | Pout | 600mW | ||
Total power dissipation | PT | 650mW | ||
I/O isolation voltage | Viso | 1,500Vrms | ||
Ambient temperature (Operating) | Topr | -40 to +85°C | (Avoid icing and condensation) | |
Ambient temperature (Storage) | Tstg | -40 to +100°C | ||
Junction temperature | Tj | 125°C |
Item | Symbol | AQW414S | Condition | ||
---|---|---|---|---|---|
Input | LED operate (OFF) current | Typical | IFoff | 0.9mA | IL=Max. |
Maximum | 3mA | ||||
LED reverse (ON) current | Minimum | IFon | 0.4mA | ||
Typical | 0.8mA | ||||
LED dropout voltage | Typical | VF | 1.25V (1.14V at IF=5mA) | IF=50mA | |
Maximum | 1.5V | ||||
Output | On resistance | Typical | Ron | 26Ω | IF=0mA IL=Max. Within 1s |
Maximum | 50Ω | ||||
Off state leakage current | Maximum | ILeak | 1μA | IF=5mA VL=Max. |
|
Transfer characteristics | Operate (OFF) time* | Typical | Toff | 0.43ms | IF=0mA→5mA IL=Max. |
Maximum | 1ms | ||||
Reverse (ON) time* | Typical | Ton | 0.3ms | IF=5mA→0mA IL=Max. |
|
Maximum | 1ms | ||||
I/O capacitance | Typical | Ciso | 0.8pF | f=1MHz VB=0V |
|
Maximum | 1.5pF | ||||
Initial I/O isolation resistance | Minimum | Riso | 1,000MΩ | 500V DC |
* | Operate/Reverse time |
---|
|
Please use under recommended operating conditions to obtain expected characteristics.
Item | Symbol | Number of used channels | Min. | Max. | Unit | |
---|---|---|---|---|---|---|
LED current | IF | - | 5 | 30 | mA | |
AQW414S | Load voltage (Peak AC) | VL | - | - | 320 | V |
Continuous load current | IL | 1ch 2ch |
- | 0.1 0.08 |
A |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)