Business
> Industrial Devices
> Automation Controls Top
> Components & Devices
> Relays / Couplers
> PhotoMOS
> PhotoMOS Lineup
> PhotoMOS Power 1 Form A DC High Capacity
> Rating/Performance
|
Item | Symbol | AQZ192 | AQZ197 | Remarks | |
---|---|---|---|---|---|
Input | LED forward current | IF | 50 mA | ||
LED reverse voltage | VF | 5 V | |||
Peak forward current | IFP | 1 A | f = 100 Hz Duty Ratio = 0.1% |
||
Power dissipation | Pin | 75 mW | |||
Output | Load voltage (DC) | VL | 60 V | 200 V | |
Continuous load current (DC) | IL | 10 A | 5 A | ||
Peak load current | Ipeak | 30 A | 15 A | 100 ms (1 shot) VL = DC |
|
Power dissipation | Pout | 2.0 W | |||
Total power dissipation | PT | 2.0 W | |||
I/O isolation voltage | Viso | 3,000 Vrms | |||
Ambient temperature (Operating) | Topr | -40 to +85°C | (Avoid icing and condensation) | ||
Ambient temperature (Storage) | Tstg | -40 to +100°C | |||
Junction temperature | Tj | 125°C |
Item | Symbol | AQZ192 | AQZ197 | Condition | ||
---|---|---|---|---|---|---|
Input | LED operate current | Typical | IFon | 0.7 mA | IL = 100 mA VL = 10 V |
|
Maximum | 3.0 mA | |||||
LED turn off current | Minimum | IFoff | 0.2 mA | |||
Typical | 0.5 mA | |||||
LED dropout voltage | Typical | VF | 1.35 V (1.17 V at IF = 10 mA) | IF = 50 mA | ||
Maximum | 1.5 V | |||||
Output | On resistance | Typical | Ron | 8 mΩ | 31 mΩ | IF = 10 mA IL = Max. Within 1 s |
Maximum | 15 mΩ | 50 mΩ | ||||
Off state leakage current | Maximum | ILeak | 10 μA | IF = 0 mA VL = Max. |
||
Transfer characteristics | Turn on time* | Typical | Ton | 1.0 ms | 0.7 ms | IF = 10 mA IL = 100 mA VL = 10 V |
Maximum | 3.0 ms | |||||
Turn off time* | Typical | Toff | 0.11 ms | 0.05 ms | ||
Maximum | 1.0 ms | |||||
I/O capacitance | Typical | Ciso | 1.3 pF | f = 1 MHz VB = 0 V |
||
Maximum | 3.0 pF | |||||
Initial I/O isolation resistance | Minimum | Riso | 1,000 MΩ | 500 V DC | ||
Max. operating frequency | Maximum | - | 0.5 cps | IF = 10 mA duty = 50 % VL = Max. IL = Max. |
* | Turn on/Turn off time |
---|
|
Please use under recommended operating conditions to obtain expected characteristics.
Item | Symbol | Min. | Max. | Unit | |
---|---|---|---|---|---|
LED current | IF | 10 | 30 | mA | |
AQZ192 | Load voltage (DC) (Peak AC) | VL | - | 48 | V |
Continuous load current | IL | - | 10 | A | |
AQZ197 | Load voltage (DC) (Peak AC) | VL | - | 160 | V |
Continuous load current | IL | - | 5 | A |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)