AQ1 Solid State Relay
Rating (Ambient temperature: 20℃, Ripple factor: less than 1%)
Item |
Part No. |
Remarks |
AQ1298 |
AQ1208 |
Input side |
Control voltage |
4 to 32 V DC |
*1 |
Input impedance |
- |
Input current, Max. |
20 mA |
Drop-out voltage |
Min. 1.0 V |
Load side |
Max. load current |
3 A |
10 A *5 |
*2 |
Load voltage |
75 to 250 Vrms |
Frequency |
45 to 65 Hz |
|
Non-repetitive surge current *3 |
100 A |
AC: In one cycle at 60 Hz |
“OFF-state” leakage current |
Max. 5 mA |
AC: at 200 V, 60 Hz |
“ON-state” voltage drop |
Max. 1.6 V |
At Max. carrying current |
Min. load current *4 |
50 mA |
|
*1 | Refer to REFERENCE DATA “3. Input current vs. input voltage characteristics”. |
*2 | Refer to REFERENCE DATA “1. Load current vs. ambient temperature characteristics”. |
*3 | Refer to REFERENCE DATA “2. Non-repetitive surge current vs. carrying time”. |
*4 | When load current is below the rating, refer to “Cautions for Use of Solid State Relays”. |
*5 | When heat sink (AQ1802) is installed. The max. load current is 5 A when heat sink is not installed. |
Return to top
Characteristics (Ambient temperature: 20℃, Ripple factor: less than 1%)
Item |
Part No. |
Remarks |
AQ1298 / AQ1208 |
Operate time |
Max. 1/2 cycle of voltage sine wave + 1 ms |
|
Release time |
Max. 1/2 cycle of voltage sine wave + 1 ms |
|
Insulation resistance |
Min. 100 MΩ between input, output and case |
at 500 V DC |
Breakdown voltage |
4,000 Vrms between input and output
2,500 Vrms between input, output and case |
For 1 minute |
Vibration resistance |
Destructive |
10 to 55 Hz at double amplitude of 2 mm |
1 hour for X, Y, Z axis |
Functional |
10 to 55 Hz at double amplitude of 2 mm |
10 minutes for X, Y, Z axis |
Shock resistance |
Destructive |
Min. 980 m/s² |
5 times each for X, Y, Z axis |
Functional |
Min. 980 m/s² |
4 times each for X, Y, Z axis |
Ambient temperature |
− 30 to +80℃ |
Non-icing and non-condensing |
Storage temperature |
− 30 to +100℃ |
Non-icing and non-condensing |
Operational method |
Zero-cross (Turn-ON and Turn-OFF) |
|
Return to top
Return to top