Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Measurement Sensors > Measurement Sensors > Thru-beam Type Digital Displacement Sensor HG-T > Order guide

Thru-beam Type Digital Displacement Sensor HG-T

Order guide

Order guide

Sensor heads

Standard type

Emitter: 8 × 30 × 60 mm 0.315 × 1.181 × 2.362 in Receiver: 8 × 30 × 60 mm 0.315 × 1.181 × 2.362 in

Slim type

Emitter: 8 × 30 × 60 mm 0.315 × 1.181 × 2.362 in Receiver: 8 × 20 × 60 mm 0.315 × 0.787 × 2.362 in

Type		Measurement width	Installation distance	Repeatability (Note 1)	Laser class	Model No.
Measurement width 10 mm 0.394 in	Standard type	10 mm 0.394 in	0 to 500 mm 0 to 19.685 in	1 μm 0.039 mil [Installation distance: 20 mm 0.787 in] 2.5 μm 0.098 mil [Installation distance: 100 mm 3.937 in] 5 μm 0.197 mil [Installation distance: 500 mm 19.685 in]	Class 1 [JIS / IEC / GB / FDA (Note 2)]	HG-T1010
Measurement width 10 mm 0.394 in	Slim type	10 mm 0.394 in	0 to 500 mm 0 to 19.685 in		Class 1 [JIS / IEC / GB / FDA (Note 2)]	HG-T1110

Notes:

1)	This is the P-P value of digital measurement value with half shading at the middle position of the installation distance.
2)	This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).

Sensor head connection cables

Type	Model No.	Cable length	Description
Sensor head connection cables	CN-HT-C2	2 m 6.562 ft	This cable is used to connect the sensor head to the controller. The cable is branched into two cables on the sensor head connecting side, but the two cables can be connected interchangeably to the emitter and receiver.
	CN-HT-C5	5 m 16.404 ft
	CN-HT-C10	10 m 32.808 ft
	CN-HT-C20	20 m 65.617 ft

Controllers

Type		Model No.	Output	Maximum number of connectable controllers
Master unit	High performance type	HG-TC101	NPN open-collector transistor	Up to 15 slave units can be connected per master unit (Note)
Master unit	High performance type	HG-TC101-P	PNP open-collector transistor
Slave units	High performance type	HG-TC111	NPN open-collector transistor
	High performance type	HG-TC111-P	PNP open-collector transistor
	Wire-saving type	HG-TC113	-

Note:	When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit.

USB communication unit

Type	Appearance	Model No.	Description
USB communication unit (Note 1)		SC-HG1-USB	When used together with the "HG-T Configuration Tool" USB-based PC setting software, current values and settings in the HG-T series can be confirmed or changed on the PC screen. * The USB-based PC setting software, "HG-T Configuration Tool," can be downloaded free from our website. • Communication specification: USB 2.0 Full Speed (Note 2) • Communication protocol: Proprietary protocol • USB port: USB Mini-B (1 port) • Number of connectable units Controller: Up to 15 units (1 master unit, 14 slave units) per SC-HG1-USB unit

Notes:

1)	The USB communication unit cannot be used with contact-type digital displacement sensors HG-S series.
2)	Dependent on PC environment.

Communication units for digital displacement sensors

Please check each product page for communication units for Digital Displacement Sensors.
>>CC-Link IE Field / CC-Link Communication Unit
>>Communication Unit for Digital Displacement Sensors SC-HG1(for EtherCAT / RS-485)

End plates

Type	Appearance	Model No.	Description
End plates		MS-DIN-E [2 pcs. per set]	Always use this when connecting controllers and a digital displacement sensor communication unit.

System configuration

Our product lineup includes communication units compatible with a variety of field networks such as CC-Link, CC-Link IE Field and EtherCAT. They can link with a production system and enable the incorporation and utilization of IoT.

*	USB communication unit and RS-485 communication unit cannot be used simultaneously.
*	To connect RS-485 communication unit via USB, the customer must arrange a USB2.0→RS-485 converter.