[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.

Search
Discontinued
Products



HE Relays PV Type

Coil data

  • Operating characteristics such as 'Operate voltage' and 'Release voltage' are influenced by mounting conditions, ambient temperature, etc.
    Therefore, please use the relay within ±5% of rated coil voltage.
  • 'Initial' means the condition of products at the time of delivery.
Rated coil
voltage
Operate voltage*
(at 20°C)
Release voltage*
(at 20°C)
Rated operating
current
(±10%, at 20°C)
Coil resistance
(±10%, at 20°C)
Rated operating
power
Max. allowable
voltage
(at 20°C)
6 V DC Max. 70% V of
rated coil voltage
(Initial)

Max. 75% V of
rated coil voltage
for 90 A Wide gap type only
Min. 10% V of
rated coil voltage
(Initial)
320 mA 18.8 Ω 1,920 mW 110% V of
rated coil voltage
9 V DC 213 mA 42.2 Ω
12 V DC 160 mA 75 Ω
24 V DC 80 mA 300 Ω
*square, pulse drive

Return to top

Specifications

Item Specifications
35 A type 48 A type 90 A type 90 A Wide gap type
Contact data Contact arrangement 1 Form A
Contact
resistance
(initial)
Max. 100 mΩ
(by voltage drop 6 V DC 1 A)
Max. 10 mΩ
(by voltage drop 5 V DC 20 A)
 
Max. 3 mΩ
(by voltage drop 5 V DC 90 A,
reference value)
Contact material AgSnO2 type AgNi type
Contact rating
(resistive)
35 A 490 V AC
35 A 48 V DC
48 A 490 V AC
48 A 48 V DC
60 A 490 V AC
90 A 60 V DC
55 A 800 V AC
90 A 60 V DC
Max. switching power
(resistive)
17,150 VA
1,680 W
23,520 VA
2,304 W
29,400 VA
5,400 W
44,000 VA
5,400 W
Max. switching voltage 490 V AC, 48 V DC 490 V AC,
60 V DC
800 V AC,
60 V DC
Max. switching current 35 A 48 A 90 A
Min. switching load (reference value) *1 100 mA 5 V DC
Insulation resistance (Initial) Min. 1,000 MΩ
(at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric
strength
(initial)
Between open contacts 2,000 Vrms for 1 min (detection current: 10 mA)
Between contact and coil 5,000 Vrms for 1 min (detection current: 10 mA)
Surge withstand voltage
(initial) *2
Between contact and coil 10,000 V
Coil holding voltage *3 40 to 100% V (at -50 to +55°C)
50 to 60% V (at +55 to +85°C)
Time characteristics (initial) Operate time Max. 30 ms at rated coil voltage (at 20°C, without bounce)
Release time *5 Max. 10 ms at rated coil voltage (at 20°C, without bounce, without diode)
Shock resistance Functional 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
Destructive 980 m/s2 (half-sine shock pulse: 6 ms)
Vibration
resistance
Functional 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 μs)
Destructive 10 to 55 Hz (at double amplitude of 1.5 mm)
Expected life Mechanical life Min. 10 x 106 ope.
(switching frequency: at 180 times/min)
Min. 106 ope.
(switching frequency: at 180 times/min)
Conditions Conditions for
usage,
transport and
storage *4
Ambient temperature: -50 to +85°C
(When using at 55°C or higher, the coil holding voltage should be 50% V to 60% V)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Unit weight Approx. 80 g Approx. 85 g
*1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2Wave is standard shock voltage of ±1.2 x 50 µs according to JEC-212-1981
*3Coil holding voltage is the coil voltage after 100 ms from the applied rated voltage.
*4For ambient temperature, please read “GUIDELINES FOR RELAY USAGE”.
*5Release time will lengthen if a diode, etc., is connected in parallel to the coil. Be sure to verify operation under actual conditions.

Return to top

Expected electrical life

Type Load Switching capacity Number of operations
1 Form A 35 A Resistive load 30 A 250 V AC Min. 200 x 103 ope.
(room temperature, switching frequency at 20 times/min)
35 A 277 V AC Min. 30 x 103 ope.
(at 85°C, switching frequency ON : OFF = 1 s : 9 s)
35 A 490 V AC Min. 10 x 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)
35 A 48 V DC Min. 10 x 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)
48 A Resistive load 48 A 277 V AC Min. 30 x 103 ope.
(at 85°C, switching frequency ON : OFF = 1 s : 9 s)
48 A 490 V AC Min. 10 x 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)
48 A 30 V DC Min. 30 x 103 ope.
(at 85°C, switching frequency ON : OFF = 1 s : 9 s)
48 A 48 V DC Min. 10 x 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)
Inductive load 48 A 250 V AC
(cos Φ=0.8)
Min. 30 x 103 ope.
(at 85°C, switching frequency ON : OFF = 0.1 s : 10 s)
72 A 250 V AC
(cos Φ=0.8)
Min. 50 ope.
(at 85°C, switching frequency ON : OFF = 0.1 s : 10 s)
90 A /
90 A Wide gap type
Resistive load 60 A 277 V AC Min. 10 x 103 ope.
(at 85°C, switching frequency ON : OFF = 1 s : 9 s)
60 A 490 V AC Min. 10 x 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)
80 A 277 V AC Min. 10 x 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)
90 A 277 V AC Min. 103 ope.
(at 85°C, switching frequency ON : OFF = 1 s : 9 s)
80 A 48 V DC Min. 10 x 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)
90 A 60 V DC Min. 103 ope.
(at 85°C, switching frequency ON : OFF = 1 s : 9 s)
90 A Wide gap type Resistive load 55 A 800 V AC Min. 103 ope.
(room temperature, switching frequency ON : OFF = 1 s : 9 s)

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)