Business > Industrial Devices > Automation Controls Top > Components & Devices > Relays / Couplers > Power Relays (Over 2A) > Power Relays (Over 2A) Lineup > LF-G Relays > Rating/Performance

LF-G Relays

Lineup
- DE Relays Compliant with European safety standards, 1 Form A/2 Form A/1 Form A 1 Form B 10 A/8 A Polarized power relays
- DJ Relays High insulation, 1-pole/2-pole 16 A, Polarized power relays
- DJ-H Relays Suitable for lighting and motor load, 1 Form A 50 A, Latching relays
- DK Relays 1 Form A 10 A, 1 Form A 1 Form B/2 Form A 8 A, Small polarized power relays
- DS Power Relays 1 Form A 8 A (AC) / 5 A (DC) , 1 Form A 1 Form B/2 Form A 5 A (AC/DC) , Small polarized power relays
- DW Relays 1 Form A 8 A/16 A, Small, Polarized power relays (latching type)
- DY Relays 1 Form A 10 A, 1 Form A 1 Form B 8 A, Small polarized power relays
- DZ-S Relays IEC62055-31 UC3 compliant, 1 Form A 90 A, Power latching relays
- HE Relays TV-10/TV-15 rated, 1 Form A 30 A, 2 Form A 25 A, Power relays
- HE Relays PV Type Compact size, 1 Form A 35 A/48 A/90 A Power relays for solar inverter
- HE-N Relays High capacity 120 A　490 V AC 1 Form A power relay
- HE-S Relays Compact size 2a and 2a1b 40 A power relays for energy management and industrial equipment
- HE-R Relays Compact size 2 Form A and 2 Form A 1Form B 80 A/4 Form A and 4 Form A and 1 Form B 40 A power relays
- JV-N Relays 1 Form A 16 A, low profile: 10.9 mm power relays for heater control
- JW Relays 1 Form A/1 Form C/2 Form A/2 Form C, 5 A/10 A, Power relays
- LD-P Relays Compliant with IEC/EN60335-1/ EN60079-15 (VDE approved) 1 Form A 5 A Slim power relays
- LF Relays Ideal for compressor and inverter loads, 1 Form A 20 A, Power relays
- LF-G Relays Load for solar inverter, Compact size, 1 Form A 22 A/33 A, Power relays
- LQ Relays Compliant with IEC/EN60335-1^*1^*2 /EN60079-15^*3 (VDE approved) 1 Form A/1 Form C 10A small power relays
- LZ Relays Low profile: 15.7 mm, 1 Form A/1 Form C 16 A, Power relay
- LZ-N Relays EN60335-1 GWT compliant, 15.7 mm Low profile, 1 Form A/1 Form C 16 A, Power relays
- NC Relays Transistor drive, 2 Form C/4 Form C, 5 A Slim power relays
- PA-N Relays Complies with IEC61010 reinforced insulation, For PLC/Interface, 1 Form A 5 A, Slim power relay
- PF Relays Compliant with European standards, 1 Form A/1 Form C 6 A, Slim power relays
- S Relays 2 Form A 2 Form B/3 Form A 1 Form B/4 Form A /4 A Polarized power relays
- SP Relays 2 Form C 15 A, 4 Form C 10 A, Polarized power relays
- ST Relays 1 Form A 1 Form B/2 Form A, 8 A, Polarized power relays
CAD data　 Catalogs/Datasheets　　
FAQ

Click here for information on compliance with standards

Basic Information

Part Number

Rating/Performance

Dimensions

Coil data

Operating characteristics such as 'Operate voltage' and 'Release voltage' are influenced by mounting conditions, ambient temperature, etc.
Therefore, please use the relay within ±5% of rated coil voltage.
'Initial' means the condition of products at the time of delivery.

Rated coil voltage	Operate voltage * (at 20°C)	Release voltage * (at 20°C)	Rated operating current (±10%, at 20°C)	Coil resistance (±10%, at 20°C)	Rated operating power	Max. allowable voltage (at 20°C)
9 V DC	Max. 70% V of rated coil voltage (Initial)	Min. 10% V of rated coil voltage (Initial)	155 mA	58 Ω	1,400 mW	120% V of rated coil voltage
12 V DC			117 mA	103 Ω
18 V DC			78 mA	230 Ω
24 V DC			59 mA	410 Ω

*	square, pulse drive

Return to top

Specifications

Item		Specifications
		Standard type	High capacity type
		Contact GAP 1.5 mm, 1.8 mm	Contact GAP 1.5 mm	Contact GAP 1.8 mm
Contact data	Contact arrangement	1 Form A
	Contact resistance (initial)	Max. 100 mΩ (by voltage drop 6 V DC 1 A)
	Contact material	AgSnO₂ type
	Contact rating (resistive)	22 A 250 V AC	31 A 250 V AC	33 A 250 V AC
	Max. switching power (resistive)	5,500 VA	7,750 VA	8,250 VA
	Max. switching voltage	250 V AC
	Max. switching current	22 A (AC)	31 A (AC)	33 A (AC)
	Min. switching load (reference value) *1	100 mA 5 V DC
Insulation resistance (initial)		Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric strength (initial)	Between open contacts	2,500 Vrms for 1 min (detection current: 10 mA)
Dielectric strength (initial)	Between contact and coil	4,000 Vrms for 1 min (detection current: 10 mA)
Surge withstand voltage (initial)*2	Between contact and coil	6,000 V
Coil holding voltage *3		35 to 120% V (at 20°C, contact carrying current 22 A) 45 to 80% V (at 85°C, contact carrying current 22 A)	35 to 120% V (at 20°C, contact carrying current 31 A) 45 to 80% V (at 85°C, contact carrying current 31 A)	35 to 120% V (at 20°C, contact carrying current 33 A) 45 to 80% V (at 85°C, contact carrying current 33 A)
Time characteristics (initial)	Operate time	Max. 20 ms at rated coil voltage (at 20°C, without bounce)
Time characteristics (initial)	Release time	Max. 10 ms at rated coil voltage (at 20°C, without bounce, without diode)
Shock resistance	Functional	100m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)
Shock resistance	Destructive	1,000m/s² (half-sine shock pulse: 6 ms)
Vibration resistance	Functional	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
Vibration resistance	Destructive	10 to 55 Hz (at double amplitude of 1.5 mm)
Expected life	Mechanical life	Contact GAP 1.5 mm: Min. 10⁶ ope. (switching frequency: at 180 times /min) Contact GAP 1.8 mm: Min. 500 x 10³ ope. (switching frequency: at 180 times/min)
Conditions	Conditions for usage, transport and storage *4	Ambient temperature: -40 to +60°C (When rated coil voltage applied) -40 to +85°C (Coil holding voltage is when 45 to 80% V of rated coil voltage is applied.) Humidity: 5 to 85% RH (Avoid icing and condensation)
Unit weight		Approx. 23 g

*1	This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2	Wave is standard shock voltage of ±1.2 x 50 µs according to JEC-212-1981
*3	Coil holding voltage is the coil voltage after 100 ms from the applied rated coil voltage.
*4	For ambient temperature, please read "GUIDELINES FOR RELAY USAGE".

Return to top

Expected electrical life

Type	Contact GAP	Load	Switching capacity	Number of operations
Standard type	1.5 mm 1.8 mm	Resistive load	22 A 250 V AC	Min. 30 x 10³ ope. (switching frequency at 20 times/min)
		Destructive	22 A 250 V AC (cosφ = 0.8)	Min. 30 x 10³ ope. (switching frequency ON : OFF = 0.1 s : 10 s)
		Over load	35 A 250 V AC (cosφ = 0.8)	Min. 50 ope. (switching frequency ON : OFF = 0.1 s : 10 s)
High capacity type	1.5 mm	Destructive	31 A 250 V AC (cosφ = 0.8)	Min. 30 x 10³ ope. (switching frequency ON : OFF = 0.1 s : 10 s)
	1.5 mm	Over load	47 A 250 V AC (cosφ = 0.8)	Min. 50 ope. (switching frequency ON : OFF = 0.1 s : 10 s)
	1.8 mm	Destructive	33 A 250 V AC (cosφ = 0.8)	Min. 30 x 10³ ope. (switching frequency ON : OFF = 0.1 s : 10 s)
	1.8 mm	Over load	50 A 250 V AC (cosφ = 0.8)	Min. 50 ope. (switching frequency ON : OFF = 0.1 s : 10 s)